Utilization of Three-dimensional Printing Technology for Manufacture of Artificial Organs_Journal of Biomedical Engineering

Authors：

LAMYuetwai , TSANGFaiyu , LIUXiaoyu , WEIRunfeng , GUOXin ,  AONingjian

College of Life Science and Technology, Jinan University, Guangzhou 510632, China;

Corresponding?author：

AONingjian, Email: taonj@jnu.edu.cn

Keywords：

three-dimensional printing; fabrication; artificial organ

DOI：

10.7507/1001-5515.20150206

Video：

Export PDF Favorites Scan Get Citation

Abstract Full text Figures/Tables Video References Cited by

In this article, we introduce the principle, describe the utilization and discuss the future development of three-dimensional printing technology for manufacturing artificial organs.

Citation： LAMYuetwai, TSANGFaiyu, LIUXiaoyu, WEIRunfeng, GUOXin, AONingjian. Utilization of Three-dimensional Printing Technology for Manufacture of Artificial Organs. Journal of Biomedical Engineering, 2015, 32(5): 1160-1164. doi: 10.7507/1001-5515.20150206 Copy

1.	?王雪瑩.3D打印技術與產業的發展及前景分析[J].中國高新技術企業:中旬刊,2012(9):3-5.
2.	王忠宏,李揚帆,張曼茵.中國3D打印產業的現狀及發展思路[J].經濟縱橫,2013(1):90-93.
3.	劉霞.三維打印或將掀起新一輪工業革命[N].科技日報. 2011-03-01(8).
4.	賀超良,湯朝暉,田華雨,等.3D打印技術制備生物醫用高分子材料的研究進展[J].高分子學報,2013,(6):722-732.
5.	江開勇.聚合物熔融擠壓堆積成型技術[J].工程塑料應用,2000,28(6):16-18.
6.	王位.三維快速成型打印技術成型材料及粘結劑研制[D].廣州:華南理工大學,2012.
7.	任繼文,劉建書.選擇性激光燒結主要成型材料的研究進展[J].機械設計與制造,2010,(11):266-268.
8.	潘琰峰,沈以赴,顧冬冬,等.選擇性激光燒結技術的發展現狀[J].工具技術,2004,38(6):3-7.
9.	姚海根.熱噴墨的技術突破[J].出版與印刷,2011,(1):33-36.
10.	YAN Y N, ZHUO X G, HU Y Y. Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition[J]. Mater Lett, 2003, 57(18):2623-2638.
11.	陳小樂,陽青松,蘇佳燦.載藥人工骨研究的應用進展[J].中國組織工程研究,2012,16(43):8117-8121.
12.	伍衛剛.三維打印技術制備多藥控釋型載藥人工骨及其治療慢性骨髓炎的實驗研究[D].武漢:華中科技大學,2010.
13.	PATIRUPANUSARA P, RUBKUMINTARA T, SUWANPRATEEB J. Direct fabrication of three-dimensional printing parts made from polymethyl methacrylate for biomedical applications[J]. Planetary Scientific Research Center Conference Proceedings, 2012, 8:80-82.
14.	MALEKSAEEDI S, WANG J K, EL H A, et al. Toward 3D printed bioactive titanium scaffolds with bimodal pore size distribution for bone ingrowth[J]. Procedia CIRP, 2013(5):158-163.
15.	ZOCCA A, GOMES C M, BERNARDO E, et al. LAS glass-ceramic scaffolds by three-dimensional printing[J]. J Eur Ceram Soc, 2013, 33(9):1525-1533.
16.	SERRA T, PLANELL J A, NAVARRO M. High-resolution PLA-based composite scaffolds via 3-D printing technology[J]. Acta Biomater, 2013, 9(3):5521-5530.
17.	GOETZ J W, LEVINE M H, IYER S R, et al. Repair of complex craniofacial bone defects using 3D-printed tricalcium phosphate scaffolds[J]. Journal of Oral and Maxillofacial Surgery, 2013, 71(9):e89-e90.
18.	SINGH J P, PANDEY P M. Fitment study of porous polyamide scaffolds fabricated from selective laser sintering[J]. Procedia Engineering, 2013, 59:59-71.
19.	LIU F H, LEE R T, LIN W H, et al. Selective laser sintering of bio-metal scaffold[J]. Procedia CIRP, 2013, 5:83-87.
20.	SHUAI C J, LI P J, LIU J L, et al. Optimization of TCP/HAP ratio for better properties of calcium phosphate scaffold via selective laser sintering[J]. Materials Characterization, 2013, 77:23-31.
21.	GAGG G, GHASSEMIEH E, WIRIA F E. Analysis of the compressive behaviour of the three-dimensional printed porous titanium for dental implants using a modified cellular solid model[J]. Proc Inst Mech Eng H, 2013, 227(9):1020-1026.
22.	BUTSCHER A, BOHNER M, DOEBELIN N, et al. New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes[J]. Acta Biomater, 2013, 9(11):9149-9158.
23.	BUTSCHER A, BOHNER M, DOEBELIN N, et al. Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering[J]. Acta Biomater, 2013, 9(2):5369-5378.
24.	KANTAROS A, KARALEKAS D. Fiber bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process[J]. Mater Des, 2013, 50:44-50.
25.	REZAIE R, BADROSSAMAY M, GHAIE A, et al. Topology optimization for fused deposition modeling process[J]. Procedia CIRP, 2013, 6:521-526.
26.	MCCULLOUGH E J, YADAVALLI V K. Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices[J]. Journal of Materials Processing Technology, 2013, 213(6):947-954.
27.	SETTI L, MORGERA A F, MENCARELLI I, et al. An HRP-based amperometric biosensor fabricated by thermal inkjet printing[J]. Sens Actuators B Chem, 2007, 126(1):252-257.
28.	FLüGGE T V, NELSON K, SCHMELZEISEN R, et al. Three-dimensional plotting and printing of an implant drilling guide:simplifying guided implant surgery[J]. Journal of Oral and Maxillofacial Surgery, 2013, 71(8):1340-1346.
29.	FU Z, SCHLIER L, TRAVITZKY N, et al. Three-dimensional printing of SiSiC lattice truss structures[J]. Materials Science and Engineering A, 2013, 560:851-856.
30.	KHALED S A, BURLEY J C, ALEXANDER M R, et al. Desktop 3D printing of controlled release pharmaceutical bilayer tablets[J]. Int J Pharm, 2014, 461:105-111.
31.	BUDDING A, VANEKER T J, WINNUBST A A. Open source powder based rapid prototyping machine for ceramics[J]. Procedia CIRP, 2013, 6:533-538.
32.	BUDDING A, VANEKER T J. New strategies for powder compaction in powder-based rapid prototyping techniques[J]. Procedia CIRP, 2013, 6:527-532.

1. ?王雪瑩.3D打印技術與產業的發展及前景分析[J].中國高新技術企業:中旬刊,2012(9):3-5.
2. 王忠宏,李揚帆,張曼茵.中國3D打印產業的現狀及發展思路[J].經濟縱橫,2013(1):90-93.
3. 劉霞.三維打印或將掀起新一輪工業革命[N].科技日報. 2011-03-01(8).
4. 賀超良,湯朝暉,田華雨,等.3D打印技術制備生物醫用高分子材料的研究進展[J].高分子學報,2013,(6):722-732.
5. 江開勇.聚合物熔融擠壓堆積成型技術[J].工程塑料應用,2000,28(6):16-18.
6. 王位.三維快速成型打印技術成型材料及粘結劑研制[D].廣州:華南理工大學,2012.
7. 任繼文,劉建書.選擇性激光燒結主要成型材料的研究進展[J].機械設計與制造,2010,(11):266-268.
8. 潘琰峰,沈以赴,顧冬冬,等.選擇性激光燒結技術的發展現狀[J].工具技術,2004,38(6):3-7.
9. 姚海根.熱噴墨的技術突破[J].出版與印刷,2011,(1):33-36.
10. YAN Y N, ZHUO X G, HU Y Y. Layered manufacturing of tissue engineering scaffolds via multi-nozzle deposition[J]. Mater Lett, 2003, 57(18):2623-2638.
11. 陳小樂,陽青松,蘇佳燦.載藥人工骨研究的應用進展[J].中國組織工程研究,2012,16(43):8117-8121.
12. 伍衛剛.三維打印技術制備多藥控釋型載藥人工骨及其治療慢性骨髓炎的實驗研究[D].武漢:華中科技大學,2010.
13. PATIRUPANUSARA P, RUBKUMINTARA T, SUWANPRATEEB J. Direct fabrication of three-dimensional printing parts made from polymethyl methacrylate for biomedical applications[J]. Planetary Scientific Research Center Conference Proceedings, 2012, 8:80-82.
14. MALEKSAEEDI S, WANG J K, EL H A, et al. Toward 3D printed bioactive titanium scaffolds with bimodal pore size distribution for bone ingrowth[J]. Procedia CIRP, 2013(5):158-163.
15. ZOCCA A, GOMES C M, BERNARDO E, et al. LAS glass-ceramic scaffolds by three-dimensional printing[J]. J Eur Ceram Soc, 2013, 33(9):1525-1533.
16. SERRA T, PLANELL J A, NAVARRO M. High-resolution PLA-based composite scaffolds via 3-D printing technology[J]. Acta Biomater, 2013, 9(3):5521-5530.
17. GOETZ J W, LEVINE M H, IYER S R, et al. Repair of complex craniofacial bone defects using 3D-printed tricalcium phosphate scaffolds[J]. Journal of Oral and Maxillofacial Surgery, 2013, 71(9):e89-e90.
18. SINGH J P, PANDEY P M. Fitment study of porous polyamide scaffolds fabricated from selective laser sintering[J]. Procedia Engineering, 2013, 59:59-71.
19. LIU F H, LEE R T, LIN W H, et al. Selective laser sintering of bio-metal scaffold[J]. Procedia CIRP, 2013, 5:83-87.
20. SHUAI C J, LI P J, LIU J L, et al. Optimization of TCP/HAP ratio for better properties of calcium phosphate scaffold via selective laser sintering[J]. Materials Characterization, 2013, 77:23-31.
21. GAGG G, GHASSEMIEH E, WIRIA F E. Analysis of the compressive behaviour of the three-dimensional printed porous titanium for dental implants using a modified cellular solid model[J]. Proc Inst Mech Eng H, 2013, 227(9):1020-1026.
22. BUTSCHER A, BOHNER M, DOEBELIN N, et al. New depowdering-friendly designs for three-dimensional printing of calcium phosphate bone substitutes[J]. Acta Biomater, 2013, 9(11):9149-9158.
23. BUTSCHER A, BOHNER M, DOEBELIN N, et al. Moisture based three-dimensional printing of calcium phosphate structures for scaffold engineering[J]. Acta Biomater, 2013, 9(2):5369-5378.
24. KANTAROS A, KARALEKAS D. Fiber bragg grating based investigation of residual strains in ABS parts fabricated by fused deposition modeling process[J]. Mater Des, 2013, 50:44-50.
25. REZAIE R, BADROSSAMAY M, GHAIE A, et al. Topology optimization for fused deposition modeling process[J]. Procedia CIRP, 2013, 6:521-526.
26. MCCULLOUGH E J, YADAVALLI V K. Surface modification of fused deposition modeling ABS to enable rapid prototyping of biomedical microdevices[J]. Journal of Materials Processing Technology, 2013, 213(6):947-954.
27. SETTI L, MORGERA A F, MENCARELLI I, et al. An HRP-based amperometric biosensor fabricated by thermal inkjet printing[J]. Sens Actuators B Chem, 2007, 126(1):252-257.
28. FLüGGE T V, NELSON K, SCHMELZEISEN R, et al. Three-dimensional plotting and printing of an implant drilling guide:simplifying guided implant surgery[J]. Journal of Oral and Maxillofacial Surgery, 2013, 71(8):1340-1346.
29. FU Z, SCHLIER L, TRAVITZKY N, et al. Three-dimensional printing of SiSiC lattice truss structures[J]. Materials Science and Engineering A, 2013, 560:851-856.
30. KHALED S A, BURLEY J C, ALEXANDER M R, et al. Desktop 3D printing of controlled release pharmaceutical bilayer tablets[J]. Int J Pharm, 2014, 461:105-111.
31. BUDDING A, VANEKER T J, WINNUBST A A. Open source powder based rapid prototyping machine for ceramics[J]. Procedia CIRP, 2013, 6:533-538.
32. BUDDING A, VANEKER T J. New strategies for powder compaction in powder-based rapid prototyping techniques[J]. Procedia CIRP, 2013, 6:527-532.

Previous Article
Research Progress of Automatic Sleep Staging Based on Electroencephalogram Signals
Next Article
Research of Effective Network of Emotion Electroencephalogram Based on Sparse Bayesian Network

Journal of Biomedical Engineering

Utilization of Three-dimensional Printing Technology for Manufacture of Artificial Organs

Abstract Full text Figures/Tables Video References Cited by

Previous Article

Next Article

Format

Content