Objective To produce a decellularized cartilage matrix (DCM) and investigate its possibil ity to be used as a scaffold for tissue engineering. Methods Fresh bovine articular cartilage from knee joints was sl iced, freeze-dried and freeze-ground into fine powder, and then was treated sequentially with Trypsin, Triton X-100 and hypotonic solution for decellularization. The decellularized matrix was freeze-dried for shaping and cross-l inked by UV radiation. Histological, immunohistological, SEM, porosity assays and biomechanical assays were used to characterize the DCM. BMSCs were isolated from rabbit bone marrow aspirate and cultured in DCM extraction medium of different concentration (100%, 10% and 1%) for 0, 24, 48 and 72 hours, respectively, to detect the release rate of the lactate dehydrogenase (LDH). The DMEM medium (5% FBS) served as the control. Biocompatibil ity was evaluated using BMSCs (1 × 107/mL) cultured with DCM. Results The DCM showed white spongy appearances, and histological analysis showed that the material was constructed by cartilage particles without any cells or cell fragments left in the matrix. Immunohistology staining and alcian blue staining showed that DCM retained the collagen and glycosaminoglycan components of cartilaginous matrix. SEM scanning showed that DCM had a porous spongy-l ike structure with the aperture ranging 30-150 μm .The porosity assay showed that the average porosity was 89.37% and the average aperture was 90.8 μm. The mechanical assay showed that there was no difference for the compress module before and after the decellularization process, which was (17.91 ± 0.98) MPa and (15.12 ± 0.77) MPa, respectively (P gt; 0.05), but were both statistical different from normal articular cartilage [(26.30 ± 1.98) MPa, P lt; 0.05]. The LDH release rate in the DCM extraction medium of different concentration was not significantly different from that in the normal DMEM medium (P gt; 0.05). The cell adhesion test showed BMSCs grew well on DCM without any signs of growth inhibition. Conclusion Articular cartilage can be decellularized and fabricated into a scaffold which retains the major components of cartilaginous matrix. DCM has goodbiochemical, biophysical characteristics and good biocompatibil ity with cultured BMSCs and may be used as a novel scaffold for tissue engineering studies.
Objective To develop a new small-caliber vascular xenograft and evaluate the feasibility of xenogenic artery for coronary artery bypass grafting. Methods Canine carotid arteries were decellularized by detergent and enzymatic extraction. All decellularized xenografts were randomly divided into two groups. Heparin-linked group （n=24）： grafts were then covalently linked with heparin. Non-heparin-linked group （n=24）： as control. Xenografts in two groups were implanted in rabbits＇ left and right carotid artery respectively as bypass grafts. Graft patency was checked by ultrasonography after 3 weeks, 3 and 6 months. Grafts were harvested after 3 and 6 months. Microscopic observation and immunohistochemical staining were performed. Results All the cells were removed while the extracellular matrix were well preserved observed. Heparin was successfully linked to the grafts through their whole thickness. There was no obstruction at both sides after implantation of the grafts, while less thrombus was found in the decellularized heparin-linked grafts than in the other side. Smooth muscle cells densely populated the graft wall and endothelial cells covered the lumen at 3 months after implantation. Conclusion Canine common carotid artery treated by detergent and enzymatic extraction and heparin linkage may be a new small-caliber vascular xenograft for coronary artery bypass grafting.
【Abstract】 Objective To design a novel small-cal iber vascular graft using a decellularized allogeneic vascularscaffold pre-loaded with bFGF. Methods The decellularized canine common carotid were obtained by a detergent-enzymatic procedure, then the scaffolds were covalently l inked with heparin and pre-loaded with bFGF, the amount of binding bFGF and releasing curve were assayed by ELISA. Canine BMSCs expanded in vitro were seed on the scaffolds to observe the effects of binding bFGF on prol iferation. Both bFGF pre-loaded and non-pre-loaded decellularized grafts were implanted in canines as carotid artery interposition for 8 weeks, the patency was examined by digital subtraction angiography and histological method. Results Histology and electron microscopic examination of the decellularized scaffolds showed that cellular components were removed completely and that the extracellular matrix structure remained intact. The amount of binding bFGF positively related to the concentration of bFGF. There was a significant difference in the amount of binding bFGF between two different scaffoldsthroughout all bFGF concentrations(P lt; 0.05), and up to 100 ng/mL, the local and sustained release of bFGF from the heparin treated scaffolds were assayed up to 20 days. Additionally, MTT test showed the bFGF-preloaded scaffolds significantly enhanced the prol iferation of seeded BMSCs in vitro compared with non-bFGF-preloaded scaffolds at 3 days after seeding and thereafter(P lt; 0.01). Furthermore, in vivo canine experiments revealed that all 8 bFGF-pre-loaded scaffolds remained patent after 8 weeks of implantation, and host cell l ined the lumen and populated the wall. Only 1 non-bFGF-pre-loaded scaffold was patent, and the other 7 grafts were occluded because of thrombsus formation. Conclusion This study provides a new strategy to develop a small diameter vascular graft with excellent biocompatibil ity and high patency rate.
ObjectiveTo explore an optimized protocol of decellularization to fabricate an ideal scaffold derived from porcine skeletal muscle acellular matrix.
MethodsSerial-step protocol of homogenating-milling-detergent method was used to fabricate decellularized porcine muscle tissue (DPMT) derived from native porcine skeletal muscle tissue from adult pig waist. Histological method was used to assess the effects of decellularization and degreasing. Sirius red staining was used to analyze collagen components. Scanning electron microscopy, BCA assay, and PicoGreen assay were used to evaluate the ultrastructure, total protein content, and DNA content in DPMT. The adipose derived stem cells (ADSCs), NIH3T3 cells, and human umbilical vein endothelial cells (HUVECs) were cultured in extraction liquor of DPMT in different concentrations for 1, 3, and 5 days, then the relative growth rate was calculated with cell counting kit 8 to assess the toxicity in vitro. Live/dead cell staining was used to evaluate the cytocompatibility by seeding HUVECs on the surface of DPMT and co-cultured in vitro for 3 days. For in vivo test, DPMT was subcutaneously implanted at dorsal site of male specific-pathogen free Sprague Dawley rats and harvested after 3, 7, 14, and 28 days. Gross obersvation was done and transverse diameter of remained DPMT in vivo was determined. HE staining and immunohistochemical staining of CD31 were used to assess inflammatory response and new capillary rings formation.
ResultsDecellularization of the porcine skeletal muscle tissue by homogenating-milling-detergent serial steps protocol was effective, time-saving, and simple, which could be finished within only 1 day. The decellularizarion and degreasing effect of DPMT was complete. The main component of DPMT was collagen type I and type IV. The DNA content in DPMT was (15.902±1.392) ng/mg dry weight, the total protein content was 68.94% of DPMT dry weight, which was significantly less than those of fresh skeletal muscle tissue[(140.727±10.422) ng/mg and 93.14%] (P<0.05). The microstructure of DPMT was homogeneous and porous. The result of cytocompatibility revealed that the cytotoxicity of DPMT was 0-1 grade, and HUVECs could stably grow on DPMT. In vivo study revealed DPMT could almost maintain its structural integrity at 14 days and it degraded completely at 28 days after implantation. The inflammatory response peaked at 3 days after implantation, and reduced obviously at 7 days. Difference was significant in the number of inflammatory cells between 2 time points (P<0.05). Neovascularization was observed at 7 days after implantation and the number of new vessels increased at 14 days, showing significant difference between at 7 and 14 days (P<0.05).
ConclusionThe homogenating-milling-detergent serial-steps protocol is effective, time-saving, and reproducible. The DPMT reveals to be cell and lipid free, with highly preserved protein component. DPMT has good biocompatibility both in vitro and in vivo and may also have potential in promoting neovascularization.
ObjectiveTo explore the possibility of constructing tissue engineered adipose by adipose tissue derived extracellular vesicles (hAT-EV) combined with decellularized adipose tissue (DAT) scaffolds, and to provide a new therapy for soft tissue defects.MethodsThe adipose tissue voluntarily donated by the liposuction patient was divided into two parts, one of them was decellularized and observed by HE and Masson staining and scanning electron microscope (SEM). Immunohistochemical staining and Western blot detection for collagen type Ⅰ and Ⅳ and laminin were also employed. Another one was incubated with exosome-removed complete medium for 48 hours, then centrifuged to collect the medium and to obtain hAT-EV via ultracentrifugation. The morphology of hAT-EV was observed by transmission electron microscopy; the nanoparticle tracking analyzer (NanoSight) was used to analyze the size distribution; Western blot was used to analyse membrane surface protein of hAT-EV. Adipose derived stem cells (ADSCs) were co-cultured with PKH26 fluorescently labeled hAT-EV, confocal fluorescence microscopy was used to observe the uptake of hAT-EV by ADSCs. Oil red O staining was used to evaluate adipogenic differentiation after hAT-EV and ADSCs co-cultured for 15 days. The DAT was scissored and then injected into the bilateral backs of 8 C57 mice (6-week-old). In experimental group, 0.2 mL hAT-EV was injected weekly, and 0.2 mL PBS was injected weekly in control group. After 12 weeks, the mice were sacrificed, and the new fat organisms on both sides were weighed. The amount of new fat was evaluated by HE and peri-lipoprotein immunofluorescence staining to evaluate the ability of hAT-EV to induce adipogenesis in vivo.ResultsAfter acellularization of adipose tissue, HE and Masson staining showed that DAT was mainly composed of loosely arranged collagen with no nucleus; SEM showed that no cells and cell fragments were found in DAT, and thick fibrous collagen bundles could be seen; immunohistochemical staining and Western blot detection showed that collagen type Ⅰ and Ⅳ and laminin were retained in DAT. It was found that hAT-EV exhibited a spherical shape of double-layer envelope, with high expressions of CD63, apoptosis-inducible factor 6 interacting protein antibody, tumor susceptibility gene 101, and the particle size of 97.9% hAT-EV ranged from 32.67 nmto 220.20 nm with a peak at 91.28 nm. Confocal fluorescence microscopy and oil red O staining showed that hAT-EV was absorbed by ADSCs and induced adipogenic differentiation. In vivo experiments showed that the wet weight of fat new organisms in the experimental group was significantly higher than that in the control group (t=2.278, P=0.048). HE staining showed that the structure of lipid droplets in the experimental group was more than that in the control group, and the collagen content in the control group was higher than that in the experimental group. The proportion of new fat in the experimental group was significantly higher than that in the control group ( t=4.648, P=0.017).ConclusionDAT carrying hAT-EV can be used as a new method to induce adipose tissue regeneration and has a potential application prospect in the repair of soft tissue defects.
Objective
To investigate the effect of canine decellularized tendon slices (DTSs) on tendon-bone healing in repairing rotator cuff injury of rabbit.
Methods
Canine DTSs were prepared by repetitive freeze/thaw 5 times combined with nuclease processing for 12 hours from the adult Beagles Achilles tendons. Histological observation and cytocompatibility evaluation for the canine DTSs were performed in vitro. Twenty-four mature male New Zealand white rabbits, weighing 2.5-3.0 kg, were randomly selected. U-shaped defect of more than 50% of normal tendon in width and 8 mm in length was made in infraspinatus tendons of unilateral limb as the experimental group; the canine DTSs were used to repair defect, and the insertion of infraspinatus tendon on greater tuberosity of humerus was reconstructed in the experimental group. No treatment was done on the contralateral limb as the control group. At 4, 8, and 12 weeks after operation, the specimens were harvested for histological observation and biomechanical test.
Results
Histological examination showed that collagen fibers of canine DTSs were well preserved, without residual cells. The cytocompatibility examination showed that fibroblasts attached well to canine DTSs. Biomechanical test showed that the maximum load and stiffness increased significantly with time, and the maximum load and stiffness at 12 weeks were significantly higher than those at 4 and 8 weeks (P lt; 0.05). The maximum load and stiffness of the experimental group at 4 and 8 weeks were significantly lower than those of the control group (P lt; 0.05). The stiffness of the experimental group at 12 weeks was significantly lower than that of the control group (t=
—
5.679, P=0.000), but no significant difference was found in the maximum load at 12 weeks between 2 groups (t=0.969, P=0.361). Histological observation showed that the control group displayed a 4-layer structure of the tendon-bone insertion. In the experimental group at 4 weeks, the tendon-bone interface was filled with granulation tissue, and a small amount of Sharpey’s fibers-like connected the tendon to bone; granulation tissue disappeared, and fibroblasts, Sharpey’s fiber, new cartilage, and chondrocytes significantly increased with time; tendon-bone interface became mature, but the tide line was not observed between the unmineralized fibrocartilage and mineralized fibrocartilage.
Conclusion
Canine DTSs prepared by repetitive freeze/thaw 5 times combined with nuclease processing for 12 hours, can enhance the healing of host tendon-bone and improve the biomechanical characteristics of the rabbit infraspinatus tendon.
Objective
To investigate a method for preparing decellularized rat heart scaffold, and to detect and evaluate the decellularized scaffold.
Methods
The decellularized rat heart scaffold was prepared by retrograde perfusion with a combination of enzymatic and Triton X-100 detergent methods to remove the populations of resident cells, and then the decellularized scaffold was observed by gross, toluidine blue staining, HE staining, scanning electron microcope (SEM), Alcian blue staining, and immunohistochemisty staining to evaluate the structure and essential component of extracellular maxtix (ECM) in the scaffold.
Results
Tissue engineered scaffold based on decellularized whole heart ECM was successfully prepared, which maintained not only the gross morphology of the heart, but also the intact vascular structure and ultrastructural conformation that certified by toluidine blue staining, HE staining, and SEM analyses. Alcian blue staining and immunohistochemisty staining showed that the essential components of ECM, such as collagen type I, glycosaminoglycan, fibronectin, and Laminin were remained in decellularized whole heart matrix.
Conclusion
The decellularized whole heart ECM prepared by method mentioned can maintain the intact structure of rat heart and basic compositions of extracellular matrices, so it could be suitable for further studies of tissue engineered scaffolds for whole heart reconstruction.
Objective To develop a tissue engineering scaffold by using 4arm branched polyethylene glycol-VS (PEG-VS) crosslinked with decellularized valved conduits (DVC), and to research on its mechanical and biological functions. Methods The valved aortic conduits of rabbits were taken and decellularized by trypsin method and then were crosslinked with 4arm branched PEG-VS to construct the composite scaffolds (CS). The functions of decellularized valved conduits and the composite scaffolds were tested by mechanics test system. Thirty New Zealand white rabbits were equally and randomly assigned to one of the three groups: the control group, the DVC group, and the CS group. Valved aortic conduits, decellularized valved conduits and composite scaffoldswere transplanted into the common carotid artery of the abovementioned three groups of rabbits respectively. Twentyeight days after the operation, patency of the transplants was tested by Color Doppler ultrasound; micromorphology and inflammatory infiltration were observed by hematoxylin eosin（HE） staining andscanning electron microscope (SEM)，and endothelialization of composite scaffolds was detected by immunofluorescent staining. Results A series of biomechanical analyses revealed that the composite scaffolds had highly similar mechanical properties as fresh tissue, and had superior elastic modulus (P=3.1×10-9) and tensile strength (P=1.1×10-6) compared with decellularized valved conduits. Color Doppler ultrasound revealed that the graft patency for the CS group was better than the control group (P=0.054) and the DVC group (P=0.019), and the intraaortic thrombosis rate and distortion rate decreased significantly. HE staining and SEM showed that the endothelialization of composite scaffolds in the CS group was significantly higher than the other two groups with the endothelial cells evenly distributed on the scaffolds. The [CM(159mm]immunofluorescent staining indicated that the positive rate of the endothelial cell marker CD34 was higher than the other two groups. Conclusion The composite scaffolds using 4arm branched PEGVS crosslinked with DVC have great mechanical and biological properties.
Objective To compare the effect of fabricating decellularized scaffold of homograft bioprosthetic tube valved (HBTV) with two kinds of cell detergents and to provide a homograft bioprosthetic scaffold for fabrication of tissueengineering heart valve (TEHV). Methods The active cells in the HBTV, which conserved by liquid nitrogen, were decellularized by low osmotic pressure of Tris buffer, in which containing sodium dodecylsulphate (SDS) and deoxycholic acid (DOA) respectively. The leaflets or aortic wall was fixed with fixative and stained with hematoxylin and eosin, collagen fibers or elastic fibers for observation and photographs by light microscope or by scanning electron microscope (SEM) after decellularized. Results When the leaflets of HBTV were incubated togetherwith 0.03% SDS or 0.5% DOA of Tris buffer respectively for 48 hours, the activeendothelial cells (ECs) in the leaflets were not only decellularized completely, but also reserved the collagen fibers or elastic fibers integrally, which is two of the main components of extracellular matrix (ECM). A part of fibroblast inthe center leaflets was reserved. The morphologic structure of leaflets after decellularized was not significantly different from that before decellularized. The concentration of SDS was increased to 0.1% when decellularized the cells of aortic wall, but DOA was still kept 0.5%. Conclusion The better decellularizedscaffold of HBTV obtained was disposed by 0.03%-0.1% SDS or 0.5% DOA, which wasadvantageous to adhesiveness and amplification of implantation cells on the decellularized scaffold of HBTV in order that HBV reendothelialized or for the TEHVfabricated in vitro.
Objective To investigate the preparation of decellularized Achilles tendons and the effect of co-culture of human fibroblasts on the scaffold so as to provide a scaffold for the tissue engineered ligament reconstruction. Methods Achilles tendons of both hind limbs were harvested from 10 male New Zealand white rabbits (5-month-old; weighing, 4-5 kg). The Achilles tendons were decellularized using trypsin, Triton X-100, and sodium dodecyl sulfate (SDS), and then gross observation, histological examination, and scanning electron microscope (SEM) observation were performed; the human fibroblasts were seeded on the decellularized Achilles tendon, and then cytocompatibility was tested using the cell counting kit 8 method at 1, 3, 5, 7, and 9 days after co-culture. At 4 weeks after co-culture, SEM, HE staining, and biomechanical test were performed for observing cell-scaffold composite, and a comparison was made with before and after decellularization. ResultsAfter decellularization, the tendons had integrated aponeurosis and enlarged volume with soft texture and good toughness; there was no loose connective tissue and tendon cells between tendon bundles, the collagen fibers arranged loosely with three-dimensional network structure and more pores between tendon bundles; and it had good cytocompatibility. At 4 weeks after co-culture, cells migrated into the pores, and three-dimensional network structure disappeared. By biomechanical test, the tensile strength and Young’s elastic modulus of the decellularized Achilles tendon group decreased significantly when compared with normal Achilles tendons group and cell-scaffold composite group (P lt; 0.05), but no significant difference was found between normal Achilles tendons group and cell-scaffold composite group (P gt; 0.05). There was no significant difference in elongation at break among 3 groups (P gt; 0.05). ConclusionThe decellularized Achilles tendon is biocompatible to fibroblasts. It is suit for the scaffold for tissue engineered ligament reconstruction.
