ObjectiveTo explore a method of three-dimensional (3D) printing technology for preparation of personalized rat brain tissue cavity scaffolds so as to lay the foundation for the repair of traumatic brain injury (TBI) with tissue engineered customized cavity scaffolds.
MethodsFive male Sprague Dawley rats[weighing (300±10) g] were induced to TBI models by electric controlled cortical impactor. Mimics software was used to reconstruct the surface profile of the damaged cavity based on the MRI data, computer aided design to construct the internal structure. Then collagen-chitosan composite was prepared for 3D bioprinter of bionic brain cavity scaffold.
ResultsMRI scans showed the changes of brain tissue injury in the injured side, and the position of the cavity was limited to the right side of the rat brain cortex. The 3D model of personalized cavity containing the internal structure was successfully constructed, and cavity scaffolds were prepared by 3D printing technology. The external contour of cavity scaffolds was similar to that of the injured zone in the rat TBI; the inner positive crossing structure arranged in order, and the pore connectivity was good.
ConclusionCombined with 3D reconstruction based on MRI data, the appearance of cavity scaffolds by 3D printing technology is similar to that of injured cavity of rat brain tissue, and internal positive cross structure can simulate the topological structure of the extracellular matrix, and printing materials are collagen-chitosan complexes having good biocompatibility, so it will provide a new method for customized cavity scaffolds to repair brain tissue cavity after TBI.
With the developing of three-dimensional (3D) printing technology, it is widely used in the treatment of bone tumors in the clinical orthopedics. Because of the great individual differences in the location of bone tumor, resection and reconstruction are difficult. Based on 3D printing technology, the 3D models can be prepared to show the anatomical part of the disease, so that the surgeons can create a patient-specific operational plans based on better understand the local conditions. At the same time, preoperative simulation can also be carried out for complex operations and patient-specific prostheses can be further designed and prepared according to the location and size of tumor, which may have more advantages in adaptability. In this paper, the domestic and international research progress of 3D printing technology in the treatment of limb bone tumors in recent years were reviewed and summarized.
ObjectiveTo review the current research status of in situ three-dimensional (3-D) printing technique and future trends.
MethodsRecent related literature about in situ 3-D printing technique was summarized, reviewed, and analyzed.
ResultsBased on the cl inical need for surgical repair, in situ 3-D printing technique is in the preliminary study, mainly focuses on in situ dermal repair and bone and cartilage repair, and succeeds in experiments, but there are still a lot of problems for cl inical application.
ConclusionWith the development of in situ 3-D printing technique, it will provide patients with real-time and in situ digital design and 3-D printing treatment with a timely and minimally invasive surgical repair process. It will be widely used in the future.
ObjectiveTo explore the gait trajectory characteristics of patients after total knee arthroplasty (TKA) assisted by three-dimensional (3D) printing navigation template.MethodsTwenty female patients (20 knees) with knee osteoarthritis who were treated with TKA assisted by 3D printing navigation template between February 2017 and February 2018 were selected as the 3D printing group. The patients were 50-69 years old, with an average age of 57.2 years. The disease duration was 4-7 years, with an average of 5.6 years. The osteoarthritis was classified as Kellgren-Lawrence Ⅲ level in 5 cases and Ⅳ level in 15 cases. The preoperative hip-knee-ankle angle (HKA) was (170.8±5.6)°. All patients were varus deformity. According to age and affected side, 20 healthy female volunteers were selected as the control group. The volunteers were 51-70 years old, with an average age of 56.7 years. Preoperative HKA was (178.8±0.6)°. There was significant difference in HKA between the two groups (P>0.05). The HKA, Western Ontario and McMaster University Osteoarthritis Index (WOMAC), and visual analogue scale (VAS) scores of the 3D printing group before and after operation were compared. At 6 months after operation, the gait trajectory characteristics of 3D printing group and control group were analyzed by Vicon gait capture system. The kinematics parameters included velocity, cadence, stride length, maximum knee flexion angle (stance), minimum knee flexion angle (stance), maximum knee flexion angle (swing), mean hip rotation angle (stance), mean ankle rotation angle (stance).ResultsThe incisions of 3D printing group healed by first intention, with no complications. All patients were followed up 7-12 months (mean, 9.0 months). The WOMAC and VAS scores at 6 months after operation were significant lower than those before operation (P<0.05). The HKA was (178.8±0.8)° at 4 weeks after operation and the difference was significant when compared with that before operation (t=39.203, P=0.000). The position of the prosthesis was good. The femoral posterior condyle osteotomy line, surgical transepicondylar axis, and patella transverse line were parallel, varus deformity was corrected, and lower limb alignment was restored to neutral position. Gait analysis at 6 months after operation showed that the differences in all kinematics parameters between the two groups were significant (P<0.05).ConclusionAssisted by 3D printing navigation template, TKA can alleviate pain symptoms and correct deformity, with satisfactory early effectiveness. Compared with healthy people, the early postoperative gait of the patients were characterized by decreasing velocity, cadence, stride length, knee flexion range, and increasing compensatory hip and ankle rotation range.
ObjectiveTo evaluate the effectiveness of three-dimensional (3D) printing artificial vertebral body and interbody fusion Cage in anterior cervical disectomy and fusion (ACCF) combined with anterior cervical corpectomy and fusion (ACDF).MethodsThe clinical data of 29 patients with multilevel cervical spondylotic myelopathy who underwent ACCF combined with ACDF between May 2018 and December 2019 were retrospectively analyzed. Among them, 13 patients were treated with 3D printing artificial vertebral body and 3D printing Cage as 3D printing group and 16 patients with ordinary titanium mesh Cage (TMC) and Cage as TMC group. There was no significant difference in gender, age, surgical segment, Nurick grade, disease duration, and preoperative Japanese Orthopaedic Association (JOA) score, visual analogue scale (VAS) score, and Cobb angle of fusion segment between the two groups (P>0.05). The operation time, intraoperative blood loss, hospitalization stay, complications, and implant fusion at last follow-up were recorded and compared between the two groups; JOA score was used to evaluate neurological function before operation, immediately after operation, at 6 months after operation, and at last follow-up; VAS score was used to evaluate upper limb and neck pain. Cobb angle of fusion segment was measured and the difference between the last follow-up and the immediate after operation was calculated. The height of the anterior border (HAB) and the height of the posterior border (HPB) were measured immediately after operation, at 6 months after operation, and at last follow-up, and the subsidence of implant was calculated.ResultsThe operation time of 3D printing group was significantly less than that of TMC group (t=3.336, P=0.002); there was no significant difference in hospitalization stay and intraoperative blood loss between the two groups (P>0.05). All patients were followed up 12-19 months (mean, 16 months). There was no obvious complication in both groups. There were significant differences in JOA score, VAS score, and Cobb angle at each time point between the two groups (P<0.05). There was an interaction between time and group in the JOA score (F=3.705, P=0.025). With time, the increase in JOA score was different between the 3D printing group and the TMC group, and the increase in the 3D printing group was greater. There was no interaction between time and group in the VAS score (F=3.038, P=0.065), and there was no significant difference in the score at each time point between the two groups (F=0.173, P=0.681). The time of the Cobb angle interacted with the group (F=15.581, P=0.000). With time, the Cobb angle of the 3D printing group and the TMC group changed differently. Among them, the 3D printing group increased more and the TMC group decreased more. At last follow-up, there was no significant difference in the improvement rate of JOA score between the two groups (t=0.681, P=0.502), but the Cobb angle difference of the 3D printing group was significantly smaller than that of the TMC group (t=5.754, P=0.000). At last follow-up, the implant fusion rate of the 3D printing group and TMC group were 92.3% (12/13) and 87.5% (14/16), respectively, and the difference was not significant (P=1.000). The incidence of implant settlement in the 3D printing group and TMC group at 6 months after operation was 15.4% (2/13) and 18.8% (3/16), respectively, and at last follow-up were 30.8% (4/13) and 56.3% (9/16), respectively, the differences were not significant (P=1.000; P=0.264). The difference of HAB and the difference of HPB in the 3D printing group at 6 months after operation and last follow-up were significantly lower than those in the TMC group (P<0.05).ConclusionFor patients with multilevel cervical spondylotic myelopathy undergoing ACCF combined with ACDF, compared with TMC and Cage, 3D printing artificial vertebrae body and 3D printing Cage have the advantages of shorter operation time, better reduction of height loss of fusion vertebral body, and maintenance of cervical physiological curvature, the early effectiveness is better.
ObjectiveTo solve the fixation problem between ligament grafts and host bones in ligament reconstruction surgery by using ligament-bone composite scaffolds to repair the ligaments, to explore the fabrication method for ligament-bone composite scaffolds based on three-dimensional (3-D) printing technique, and to investigate their mechanical and biological properties in animal experiments.
MethodsThe model of bone scaffolds was designed using CAD software, and the corresponding negative mould was created by boolean operation. 3-D printing techinique was employed to fabricate resin mold. Ceramic bone scaffolds were obtained by casting the ceramic slurry in the resin mould and sintering the dried ceramics-resin composites. Ligament scaffolds were obtained by weaving degummed silk fibers, and then assembled with bone scaffolds and bone anchors. The resultant ligament-bone composite scaffolds were implanted into 10 porcine left anterior cruciate ligament rupture models at the age of 4 months. Mechanical testing and histological examination were performed at 3 months postoperatively, and natural anterior cruciate ligaments of the right sides served as control.
ResultsBiomechanical testing showed that the natural anterior cruciate ligament of control group can withstand maximum tensile force of (1 384±181) N and dynamic creep of (0.74±0.21) mm, while the regenerated ligament-bone scaffolds of experimental group can withstand maximum tensile force of (370±103) N and dynamic creep of (1.48±0.49) mm, showing significant differences (t=11.617,P=0.000; t=-2.991,P=0.020). In experimental group, histological examination showed that new bone formed in bone scaffolds. A hierarchical transition structure regenerated between ligament-bone scaffolds and the host bones, which was similar to the structural organizations of natural ligament-bone interface.
ConclusionLigament-bone composite scaffolds based on 3-D printing technique facilitates the regeneration of biomimetic ligament-bone interface. It is expected to achieve physical fixation between ligament grafts and host bone.
Objective To evaluate the effectiveness of distal femoral osteotomy aided by three-dimensional (3D) printing cutting block for correction of vaglus knee with osteoarthritis. Methods Between January 2014 and January 2016, 12 patients (15 knees) with vaglus deformity and lateral osteoarhritis underwent medial closing wedge distal femoral osteotomy. There were 5 males and 7 females, aged 30-60 years (mean, 43.8 years). The mean disease duration was 6.6 years (range, 1–12 years). The unilateral knee was involved in 9 cases and bilateral knees in 3 cases. According to Koshino’s staging system, 1 knee was classified as stage I, 9 knees as stage II, and 5 knees as stage III. The X-ray films of bilateral lower extremities showed that the femorotibial angle (FTA) and anatomical lateral distal femoral angle (aLDFA) were (160.40±2.69)° and (64.20±2.11)° respectively. Mimics software was used to design and print the cutting block by 3D printing technique. During operation, the best location of distal femoral osteotomy was determined according to the cutting block. After osteotomy, internal fixation was performed using a steel plate and screws. Results All incisions healed primarily; no complication of infection or deep vein thrombosis was observed. All patients were followed up 6-18 month (mean, 12.2 months). At 6 months after operation, the hospital for special surgery (HSS) score for knee was significantly improved to 89.07±2.49 when compared with preoperative score (65.27±1.49,t=–28.31,P=0.00); the results were excellent in 10 knees, good in 4 knees, and fair in 1 knee with an excellent and good rate of 93.3%. The bony union time was 2.9-4.8 months (mean, 3.3 months). Bone delayed union occurred in 1 case (1 knee). The postoperative FTA and aLDFA were (174.00±1.41)° and (81.87±1.06)° respectively, showing significant differences when compared with preoperative ones (t=–18.26，P=0.00;t=–25.19,P=0.00). The percentage of medial tibial plateau in whole tibial plateau was 49.78%±0.59%, showing no significant difference when compared with intraoperative measurement (49.82%±0.77%,t=0.14,P=0.89). Conclusion 3D printing cutting block can greatly improve the accuracy of distal femoral osteotomy, and ensure better effectiveness for correction of vaglus knee with osteoarthritis.
ObjectiveTo determine the feasibility of fabricating molds using a three-dimensional (3D) printer for producing customized bone cement for repairing bone defect.
MethodsBetween February 2015 and March 2016, 13 patients with bone defects were treated. There were 9 males and 4 females with an average age of 38.4 years (range, 20-58 years), including 7 cases of chronic osteomyelitis, 3 cases of bone tuberculosis, 2 cases of bone tumor, and 1 case of ischemic necrosis. The defect located at the humerus in 3 cases, at the femur in 4 cases, and at the tibia in 6 cases. The defect ranged from 4.5 to 8.9 cm in length (mean, 6.7 cm). Before operation, Mimics10.01 software was used to design cement prosthesis, 3-matic software to design shaping module which was printed by 3D technology. After removal of the lesion bone during operation, bone cement was filled into the shaping module to prepare bone cement prosthesis for repairing defect.
ResultsThe measurement result from Image J software showed that the match index of interface between the mirror restored digital and bone interface was 95.1%-97.4% (mean, 96.3%); the match index of interface between bone cement prosthesis and bone interface was 91.2%-94.7% (mean, 93.2%). It was one time success during separation between formed bone cement and shaping module without any shatter or fall off. All incisions healed by first intention. The cases were followed up 5-17 months (mean, 9.4 months). X-ray films and CT scans showed good position of bone cement prosthesis without any fracture; no peripheral fracture occurred.
Conclusion3D printing customized bone cement shaping module can shorten the operation time, and customized bone cement prothesis has good match with bone interface, so it can avoid further adjustment and accord with the biomechanical rules of surgical site.
ObjectiveTo summarize the research progress of several three-dimensional (3-D) printing scaffold materials in bone tissue engineering.
MethodThe recent domestic and international articles about 3-D printing scaffold materials were reviewed and summarized.
ResultsCompared with conventional manufacturing methods, 3-D printing has distinctive advantages, such as enhancing the controllability of the structure and increasing the productivity. In addition to the traditional metal and ceramic scaffolds, 3-D printing scaffolds carrying seeding cells and tissue factors as well as scaffolds filling particular drugs for special need have been paid more and more attention.
ConclusionsThe development of 3-D printing porous scaffolds have revealed new perspectives in bone repairing. But it is still at the initial stage, more basic and clinical researches are still needed.
ObjectiveTo explore a new method of treating serious tibiofibula comminuted fracture by using three-dimensional (3-D) printing personalized external fixator.
MethodsIn April 2015, a male patient (aged 18 years with a height of 171 cm and a weight of 67 kg) with left tibiofibula comminuted fracture was included in the study. Computer-assisted reduction technique combined with 3-D printing was used to develop a customised personalized external fixator for fracture reduction. The effectiveness was observed.
ResultsThe operation time was about 10 minutes without fluoroscopy, and successful reduction was obtained. The patient had equal limb length after operation. X-ray films showed that the posterior angulation of distal fracture was corrected 37°, and the eversion angle was corrected 4°. The tibial fractures had good paraposition or alignment, and the lower limb force line was corrected completely. No new fracture displacement occurred. The clinical healing time of fracture was 3.5 months and the bone union was achieved after 8 months. The function of affected limb recovered well after operation.
ConclusionA personalized external fixator for serious tibiofibula comminuted fracture reduction made by 3-D printing technique has the merits of easy manipulation, high individuation, accurate reduction, stable fixation, and no need of fluoroscopy.
