Objective To introduce the latest advances of research on repair of the degenerative intervertebral disc with gene transduction.Methods The recentlypublished articles about the treatment of degenerative disc with gene transduction were reviewed, especially the articles published during the recent 5 years about the application of this therapy to regulating the synthesisand degradation of the extracellular matrix of the degenerative intervertebral disc.Results The shape and function of the normal intervertebral disc were reported to be closely related to the synthesis and degradation of the extracellular matrix of the intervertebral disc. The extracellular matrix of the intervertebral disc was a target for the gene transduction to repair the degenerative intervertebral disc. There was a great development of the treatment with gene transduction, especially in vector choice, target gene transduction, and transgene regulation and safety. Conclusion The advances of the research have indicated that repair of the degenerative intervertebral disc with gene transduction is a keyto curing the disease of the degenerative intervertebral disc.
Objective To investigate the feasibil ity of replacing urinary epithel ial cells with oral mucosa cell to reconstruct tissue engineered urethra by being seeded on bladder acellular matrix graft (BAMG). Methods Eighteen male New Zealand rabbits, aged 10 weeks, weighing 0.3-0.5 kg, were used in this study. Oral mucosa cell of 12 rabbits were isolated and seeded onto a culture dish with a feeder layer of 3T3 and a culture dish without 3T3, respectively. The morphologic change and growth condition of oral mucosa cells were observed by inverted phase contrast microscope after 2 days of seeding. The quantity of oral mucosa cells was counted using cell counting meter; the cell growth curve was drawn and the immunofluorescence staining with broad-spectrum keratin antibody was carried out. The bladders taken from the rest 6 rabbits were decelluled to make BAMG and the tissue of 1 cm × 1 cm was randomly selected to observe the effect of acellularization. The second passage oral mucosa cells cultured with 3T3 were appl ied to steril ized BAMG to obtain a issueengineered mucosa. The tissue-engineered mucosa was assessed using HE staining and scanning electron microscope after being cultured for 1 week. Results Oral mucosa cells seeded onto a feeder layer of 3T3 could be passaged for 7 or 8 generations with homogeneous forms and full function. Oral mucosa cells cultured without 3T3 could only be subcultured for 2 generations before aging and had multiple shapes and different sizes. Oral mucosa cells cultured by the two methods both started logarithmic growth on the 8th day and reached the peak value on the 14th day, which was indicated by the cell growth curve. However, more cells could be obtained through oral mucosa cells cultured with 3T3 than those cultured without 3T3. Oral mucosa cells manifestated green colour fluorescence cultured with or without 3T3. After the cells were removed, the BAMG presented as a porous membrane. The HE staining showed that the effect of acellularization was good and there were no cells at BAMG. The second passage oral mucosa cells cultured with 3T3 were expanded and seeded onto steril ized BAMG to obtain a tissue-engineered mucosa. Good compatibil ity of the compound graft was assessed using HE staining and scanning electron microscope. HE staining and scanning electron microscope showed that oral mucosa cells had good biocompatibil ity with BAMG after the tissue engineered mucosa was cultured for 1 week. Conclusion Oral mucosa cells of rabbit can be cultured in vitro and attain magnitude quantities. Oral mucosa cell also have good biocompatibil ity with BAMG and the compound graft could be a new material for urethral reconstruction.
Objective
To review the decellularized methods for obtaining extracellular matrix (ECM) and the applications of decellularized ECM scaffold in tissue engineering.
Methods
Recent and related literature was extensively and comprehensively reviewed. The decellularized methods were summarized and classified. The effects of different sterilization methods on decellularized scaffolds were analyzed; the evaluation criterion of extent of decellularization was put forward; and the application of decellularized ECM scaffold in different tissues and organs engineering field was summarized.
Results
The decellularized methods mainly include physical methods, chemical methods, and biological methods, and different decellularization methods have different effects on the extent of cell removal and ECM composition and structure. Therefore, the best decellularization method will be chosen according to the characteristics of the tissues and decellularization methods to achieve the ideal result.
Conclusion
It is very important to choose the appropriate decellularized method for preparing the biological materials desired by tissue engineering. The biological scaffolds prepared by decellularized methods will play an important role in tissue engineering and regenerative medicine.
ObjectiveTo explore the morphological and functional features of tissue engineered composite constructed with bone mesenchymal stem cells (BMSCs) as seeding cells, thermosensitive collagen hydrogel (TCH) and poly-L-lactic acid (PLLA) as the extracellular matrix (ECM) scaffolds in the dynamic culture system.
MethodsBMSCs were separated from long bones of Fischer344 rat, and cultured; and BMSCs at the 3rd generation were seeded on the ECM scaffold constructed with braided PLLA fiber and TCH. The BMSCs-ECM scaffold composite was cultured in the dynamic culture system which was designed by using an oscillating device at a frequency of 0.5 Hz and at swing angle of 70° (experimental group), and in the static culture system (control group) for 7 days. The general observation and scanning electron microscopy (SEM) observation were performed; total DNA content was measured at 0, 1, 3, and 7 days.
ResultsPLLA was surrounded by collagen to form translucent gelatiniform in 2 groups; and compact membrane developed on the surface of PLLA. SEM observation showed that BMSCs had high viability and were fusiform in shape with microvilli on the surface of cells, and arranged in line; collagen and cells filled in the pores of PLLA fiber in the experimental group. The cells displayed a flat shape on the surface; there were less cells filling in the pores of PLLA fiber in the control group. At 1, 3, and 7 days, total DNA content in the experimental group was significantly higher than that in control group (P < 0.05). The total DNA content were increased gradually with time in 2 groups, showing significant difference between at 0 day and at 7 days (P < 0.05).
ConclusionThe ECM constructed with TCH and PLLA has good biocompatibility. The dynamic cultivation system can promote the cell proliferation, distribution, and alignment on the surface of the composite, so it can be used for tissue engineered composite in vitro.
Objective
To investigate the feasibility of fabricating an oriented scaffold combined with chondrogenic-induced bone marrow mesenchymal stem cells (BMSCs) for enhancement of the biomechanical property of tissue engineered cartilage in vivo.
Methods
Temperature gradient-guided thermal-induced phase separation was used to fabricate an oriented cartilage extracellular matrix-derived scaffold composed of microtubules arranged in parallel in vertical section. No-oriented scaffold was fabricated by simple freeze-drying. Mechanical property of oriented and non-oriented scaffold was determined by measurement of compressive modulus. Oriented and non-oriented scaffolds were seeded with chondrogenic-induced BMSCs, which were obtained from the New Zealand white rabbits. Proliferation, morphological characteristics, and the distribution of the cells on the scaffolds were analyzed by MTT assay and scanning electron microscope. Then cell-scaffold composites were implanted subcutaneously in the dorsa of nude mice. At 2 and 4 weeks after implantation, the samples were harvested for evaluating biochemical, histological, and biomechanical properties.
Results
The compressive modulus of oriented scaffold was significantly higher than that of non-oriented scaffold (t=201.099, P=0.000). The cell proliferation on the oriented scaffold was significantly higher than that on the non-oriented scaffold from 3 to 9 days (P lt; 0.05). At 4 weeks, collagen type II immunohistochemical staining, safranin O staining, and toluidine blue staining showed positive results in all samples, but negative for collagen type I. There were numerous parallel giant bundles of densely packed collagen fibers with chondrocyte-like cells on the oriented-structure constructs. Total DNA, glycosaminoglycan (GAG), and collagen contents increased with time, and no significant difference was found between 2 groups (P gt; 0.05). The compressive modulus of the oriented tissue engineered cartilage was significantly higher than that of the non-oriented tissue engineered cartilage at 2 and 4 weeks after implantation (P lt; 0.05). Total DNA, GAG, collagen contents, and compressive modulus in the 2 tissue engineered cartilages were significantly lower than those in normal cartilage (P lt; 0.05).
Conclusion
Oriented extracellular matrix-derived scaffold can enhance the biomechanical property of tissue engineered cartilage and thus it represents a promising approach to cartilage tissue engineering.
Objective To determine whether the transforminggrowth factor β1 (TGF-β1) is a key regulatory molecule required for an increase or a balance of extracellular matrix (ECM) and DNA synthesis in the goat passaged nucleus pulposus (NP) cells. Methods The NP cells isolated from the goat intervertebral discs were cultured in vitro for a serial of passages and transfected with the replicationincompetent adenoviral vectors carrying the human TGF-β1 (hTGF-β1) or lacZ genes. Then, they were cultured in monolayer or alginate bead 3dimensional (3-D) systems for 10 days.The changes in the production and the molecular components of ECM that occurredin the NP cells transfected with Ad/hTGF-β1 or the controls were evaluated by Westernblot and absorbance of glycosaminoglycan (GAG)-Alcian Blue complexes. Differences of DNA synthesis in the variant cells and culture systems were assessed by fluorometric analysis of the DNA content. ResultsA quantitation in the variant culture systems indicated that in monolayers the NP cells at Passage 3 transfected with Ad/hTGF-β1 had a much higher cell viability and more DNA synthesis(P＜0.05); however, in the alginate 3-D culture system, the NP cells transfected with Ad/hTGF-β1 did not have any significant difference from the controls(P＞0.05). The Western blotting analysis ofthe protein sample isolated from the variant cells for TGF-β1, type Ⅱ collagen, and Aggrecan expression indicated that in the monolayers and alginate 3-D culture systems the NP cells at Passage 3 transfected with Ad/hTGF-β1 revealed much higher protein levels than the controls(P＜0.05)； whereas the type Ⅰcollagen content was much lower than the controls (P＜0.05), but a significatly increased ratio of type Ⅱ/type Ⅰ collagen was found in both of the cell culture systems(P＜0.05). The GAG quantification also showed a positive result in both the cell culture systems and the NP cells at Passage 3 transfected with Ad/hTGF-β1 had a much higher GAG content than the controls(P＜0.05). Conclusion To a greaterextent, hTGF-β1 can play a key role in maintaining the phenotype of the NP cells and can still have an effect of the phenotypic modulation after a serial of the cell passages. The NP cells that are genetically manipulated to express hTGF-β1 have a promising effect on the restoration of the intervertebral disc defects. The NP cells transfected with Ad/hTGF-β1 cultured in the 3-D alginate bead systems can show a nearly native phenotype.
OBJECTIVE: To review the role of matrix metalloproteinase-1 (MMP-1) in the course of healing in wounded skin. METHODS: The recent literatures on MMP-1 in skin wound repair were reviewed, which gave the insight into the local effect of MMP-1 during re-epithelialization. RESULTS: Following injury, basal keratinocytes, moving from the wound edge and interact with dermal matrix proteins in the wound bed, were induced to express MMP-1 in a specific space-time pattern. MMP-1 cleaved the collagen, thereby altering its structure and affinity by which the keratinocytes binded it. MMP-1 served a beneficial role in wound healing by facilitating the proliferation and movement of keratinocytes over the collagen-rich wound bed during re-epithelialization. CONCLUSION: MMP-1 expression of migrating keratinocytes directly influences the re-epithelialization during the course of healing of the wounded skin.
This paper reviewed the main achievements in the research on tissue engineering tendon, focusing on major problems concerning the substitute for extracellular matrix (ECM) of tendon, biological characteristics of tendon cells, and tendon cells compounding with ECM substitute. It was concluded the important problems in the study of the tissue engineering having specific reparative functions could be: to prepare the ECM materials suitable for the tendon cells to attach, grow, and function; to establish the tendon cell line whose growth, proliferation, and immunological antigenicity could be modulated and controlled, and simulating the mechanical environment of tendon in vivo, to adopt three-dimensional tendon cell culture method.
Objective To investigate the feasibil ity of preparing the porous extracellular matrix (ECM) by use of some chemicals and enzymes to decellularize the porcine carotid artery. Methods The porcine carotid artery was procured, and warm ischemia time was less than 30 minunts. The porcine carotid artery was decellularized with 1% sodium dodecyl sulfate (SDS) for 60 hours to prepare common ECM; then common ECM was treated with 0.25% trypsin (for 6 hours) and 0.3 U/ mL collagenase (for 24 hours) to prepare porous ECM. The common ECM and porous ECM were stained with HE,Masson’s trichrome, and Orcein to evaluate the histological features. Then the mechanical property, cytotoxicity, and pore size of ECMs were determined. After 4 weeks of subcutaneous implantation in dogs, the histological examination was used for the study. Results Histological observation confirmed that 2 kinds of ECMs were decellularized completely and more porous structure was observed in porous ECM. Scanning electron microscope showed the pores in porous ECM were greater and the length of shorter axis in porous ECM ranged from 5 to 30 μm, the length of longer axis from 40 to 100 μm. The porosity of porous ECM (99.25%) was greater than that of common ECM (91.50%). The burst pressure of porous ECM decreased when compared with common ECM, showing significant difference [(0.154 3 ± 0.012 7) MPa vs [0.305 2 ± 0.015 7) MPa, P lt; 0.05]. There was no significant difference in suture retention strength between 2 kinds of ECMs (P gt; 0.05). The cytotoxicity test showed no obvious cytotoxicity in 2 kinds of ECMs. In vivo implantation test showed that the deeper host cells infiltration and more neo-microvessels in porous ECM were observed than in common ECM. Conclusion SDS and some enzymes can be used to prepare porous ECM as the scaffold for tissue engineered blood vessels.
ObjectiveTo review the application of cell derived decellularized extracellular matrix (CDM) in tissue engineering. Methods The literature related to the application of CDM in tissue engineering was extensively reviewed and analyzed. Results CDM is a mixture of cells and their secretory products obtained by culturing cells in vitro for a period of time, and then the mixture is treated by decellularization. Compared with tissue derived decellularized extracellular matrix (TDM), CDM can screen and utilize pathogen-free autologous cells, effectively avoiding the possible shortcomings of TDM, such as immune response and limited sources. In addition, by selecting the cell source, controlling the culture conditions, and selecting the template scaffold, the composition, structure, and mechanical properties of the scaffold can be controlled to obtain the desired scaffold. CDM retains the components and microstructure of extracellular matrix and has excellent biological functions, so it has become the focus of tissue engineering scaffolds. ConclusionCDM is superior in the field of tissue engineering because of its outstanding adjustability, safety, and high bioactivity. With the continuous progress of technology, CDM stents suitable for clinical use are expected to continue to emerge.
