Objective To evaluate the effect of remote controlled injection manipulator system (RCIM) assisted percutaneous kyphoplasty (PKP) for the treatment of rupture of posterior vertebral osteoporotic vertebral fracture by comparing with intermittent hand bolus injection of bone cement during operation. Methods Between September 2010 and January 2016, a retrospective analysis was made on the clinical data of 48 senile patients with single segment rupture of the posterior vertebral osteoporotic thoracolumbar fracture undergoing PKP who accorded with the inclusion criteria. Of 48 patients, 22 received intermittent hand bolus injection of bone cement in the control group, and 26 received RCIM assisted bone cement perfusion in the trial group. There was no significant difference in age, gender, duration of disease, causes of injury, implicated vertebral bodies, bone mineral density T value, pain duration, preoperative visual analogue scale (VAS), relative vertebral body height in the anterior part, and posterior convex Cobb angle between groups (P>0.05). The bone cement perfusion time, the radiation dose of both doctors and patients, and the amount of bone cement injection were recorded; treatment effects were evaluated based on VAS score, posterior convex Cobb angle, relative ver-tebral body height in the anterior part, ratios of bone cement diffusion area and bone cement leakage rate. Results The patients were followed up for 6 months; no complications of toxic effect of bone cement, spinal cord or nerve root injuries, infection and vascular embolization occurred during follow-up period. There was no significant difference in bone cement injection amount and radiation dose of doctors between groups (P>0.05), but bone cement perfusion time, ratios of bone cement diffusion area, and radiation dose of patients were significantly lower in the trial group than the control group (P<0.05). Bone cement leakage was observed in 6 cases of the control group (27.27%) and 2 cases of the trial group (7.69%), showing significant difference between groups (χ2=4.850,P=0.029); no cement leakage into the spinal canal was found in both groups. VAS score, relative vertebral body height in the anterior part, and posterior convex Cobb angle were significantly improved at 3 days and 6 months after operation when compared with preoperative ones (P<0.05), but no significant difference was observed in the above indexes between groups at 3 days and 6 months after operation (P>0.05). Conclusion Satisfactory effectiveness can be achieved by applying RCIM assisted PKP for the treatment of rupture of posterior vertebral osteoporotic vertebral fracture. RCIM can shorten perfusion time, reduce radiation dose, and decrease incidence of bone cement leakage.
ObjectiveTo introduce the etiology and prevention of bone cement implantation syndrome (BCIS). Methods The literature about BCIS at home and abroad in recent years was extensively reviewed, and the incidence, clinical manifestations, etiology, and prevention of BCIS were summarized and analyzed. Results The clinical manifestations of BCIS are diverse. The etiology of BCIS is not completely clarified, and it may be related to circulating methyl methacrylate-mediated model, embolus-mediated model, histamine release and hypersensitivity response, complement activation and multimodal model. BCIS prevention begins with the identification of high-risk patients in preoperative evaluation and communication between surgeon and anesthesiologist about the choice of implant type, surgical procedure, and technique to minimize the risk of cardiovascular complications in high-risk patients with multiple or severe risk factors or comorbidities. Preoperative assessment and optimization of a patient’s cardiovascular reserve is also critical to prevent BCIS. ConclusionBCIS is a possible complication after hip joint arthroplasty, and its pathogenesis needs to be further research in order to provide new ideas for prevention and treatment.
Objective To summarize the clinical outcome of the Ribbed anatomic cementless total hip arthroplasty (THA) in the treatment of hip-joint disease. Methods From January 2001 to June 2005, 34 patients(38 hips) with hip-joint disease were treated with Ribbed anatomic cementless THA. Their ages ranged from 29 to 55 years with an average age of 42.7 years.The disease course was from 3 to 18 years. Among these cases, there were 7 cases (7 hips) of femoral neck fracture, 5 cases(5 hips) of traumatic arthritis after fracture of acetabulum, 15 cases(16 hips) of necrosis of the femoral head and 7 cases(10 hips) of ankylosing spondylitis. Four patients were operated on both hip joints. The average Harris hip score was 38.6(25-57) before operation. Results Twenty-one patients(23 hips) were followed up 861 months with an average of 35 months. The Harris hip score was 76-98 after operation with an average of 92.3, showing significant difference when compared with that before operation(Plt;0.05). The excellent and good result was achieved in 93.5 % of patients. Radiographs showed no prosthetic osteolysis and no evidence of loosening. Pain in the thigh occurred in 4 patients,and it can be relieved by using nonsteroid antiinflammatory drug. Conclusion Ribbed anatomic cementless THA has good clinical and radiographic results in treating patients with hip-joint disease.
Calcium phosphate cement (CPC) has been widely used as bone fillers because of its excellent bioactivity and biocompatibility. Meanwhile, CPC is also an attractive candidate for the incorporation of drug or microspheres, because the preparing procedure avoids sintering and heating release. This paper summarizes the clinical applications of microspheres incorporated in CPC from the aspects of sustained drug release, accelerated degradation, porous structure and improved mechanical properties. The paper is aimed to analyze the methods and principles of microspheres loaded CPC, and so as to lay a foundation for the further research of improving and manufacturing the CPC with ideal properties.
Objective To compare the effectiveness of different puncture methods of the flexible bone cement delivery device in unilateral percutaneous curved vertebroplasty for osteoporotic vertebral upper 1/3 compression fractures. Methods A retrospective analysis was conducted on the clinical data of 67 patients with osteoporotic vertebral upper 1/3 compression fractures who were admitted and met the selection criteria between January 2023 and April 2024. The patients were divided into two groups based on the puncture method of the flexible bone cement delivery device: the oblique puncture group (n=37) and the parallel puncture group (n=30). There was no significant difference (P>0.05) between the two groups in terms of gender, age, bone mineral density (T value), distribution of fractured vertebrae, time from injury to operation, and preoperative visual analogue scale (VAS) score for pain, Oswestry disability index (ODI), anterior vertebral height of the fractured vertebra, and Cobb angle of the fractured vertebra. The following parameters were compared between the two groups: operation time, incidence of secondary puncture, incidence of bone cement leakage, volume of injected bone cement, bone cement distribution score, as well as VAS score, ODI, anterior vertebral height of the fractured vertebra, and Cobb angle of the fractured vertebra at 1 day after operation and at last follow-up. Results Two cases in the oblique puncture group and 7 cases in the parallel puncture group underwent secondary puncture during operation, and the difference in the incidence of secondary puncture was significant (P<0.05). No complications such as bone cement hypersensitivity, bone cement embolism, nerve injury, or epidural hematoma occurred in both groups. There was no significant difference in operation time, volume of injected bone cement, incidence of bone cement leakage, distribution score and rating of bone cement between the two groups (P>0.05). All patients were followed up 6-18 months (mean, 12.0 months), and there was no significant difference in the follow-up time between the two groups (P>0.05). No further fracture collapse or compression occurred in the fractured vertebra during follow-up. Both groups exhibited significant improvements in VAS score, ODI, anterior vertebral height, and Cobb angle of the fractured vertebra after operation compared to baseline (P<0.05). There were also significant differences between the two time points after operation (P<0.05). However, there was no significant difference in the above indicators between the two groups (P>0.05). Conclusion For osteoporotic vertebral upper 1/3 compression fractures treated with unilateral percutaneous curved vertebroplasty, both oblique and parallel puncture methods of the flexible bone cement delivery device can effectively relieve pain, but the former is more conducive to reducing the incidence of secondary puncture.
ObjectiveTo investigate the mechanical properties of the novel compound calcium phosphate cement (CPC) biological material as well as the biological activity and osteogenesis effects of induced pluripotent stem cells (iPS) seeding on scaffold and compare their bone regeneration efficacy in cranial defects in rats.MethodsAc- cording to the different scaffold materials, the experiment was divided into 4 groups: pure CPC scaffold group (group A), CPC∶10%wt chitosan as 2∶1 ratio mixed scaffold group (group B), CPC∶10%wt chitosan∶whisker as 2∶1∶1 ratio mixed scaffold group (group C), and CPC∶10%wt chitosan∶whisker as 2∶1∶2 ratio mixed scaffold group (group D). Mechanical properties (bending strength, work-of-fracture, hardness, and modulus of elasticity) of each scaffold were detected. The scaffolds were cultured with fifth generation iPS-mesenchymal stem cells (MSCs), and the absorbance (A) values of each group were detected at 1, 3, 7, and 14 days by cell counting kit 8 (CCK-8) method; the alkaline phosphatase (ALP) activity, Live/Dead fluorescence staining and quantitative detection, ALP, Runx2, collagen typeⅠ, osteocalcin (OC), and bone morphogenetic protein 2 (BMP-2) gene expressions by RT-PCR were detected at 1, 7, and 14 days; and the alizarin red staining were detected at 1, 7, 14, and 21 days. Twenty-four 3-month-old male Sprague Dawley rats were used to establish the 8 mm-long skull bone defect model, and were randomly divided into 4 groups (n=6); 4 kinds of scaffold materials were implanted respectively. After 8 weeks, HE staining was used to observe the repair of bone defects and to detect the percentage of new bone volume and the density of neovascularization.ResultsThe bending strength, work-of-fracture, hardness, and modulus of elasticity in groups B, C, and D were significantly higher than those in group A, and in groups C, D than in group B, and in group D than in group C (P<0.05). CCK-8 assay showed that cell activity gradually increased with the increase of culture time, theA values in groups B, C, and D at 3, 7, 14 days were signifiantly higher than those in group A, and in groups C, D than in group B (P<0.05), but no significant difference was found between groups C and D (P>0.05). Live/Dead fluorescence staining showed that the proportion of living cells in groups B, C, and D at 7 and 14 days was significantly higher than that in group A (P<0.05), and in groups C, D at 7 days than in group B (P<0.05); but no significant difference was found between groups C and D (P>0.05). RT-PCR showed that the relative expressions of genes in groups B, C, and D at 7 and 14 days were significantly higher than those in group A, and in groups C, D than in group B (P<0.05); but no significant difference was found between groups C and D (P>0.05). Alizarin red staining showed that the red calcium deposition on the surface of scaffolds gradually deepened and thickened with the prolongation of culture time; theA values in groups B, C, and D at 14 and 21 days were significantly higher than those in group A (P<0.05), and in groups C and D than in group B (P<0.05), but no significant difference was found between groups C and D (P>0.05).In vivo repair experiments in animals showed that the new bone in each group was mainly filled with the space of scaffold material. Osteoblasts and neovascularization were surrounded by new bone tissue in the matrix, and osteoblasts were arranged on the new bone boundary. The new bone in groups B, C, and D increased significantly when compared with group A, and the new bone in groups C and D was significantly higher than that in group B. The percentage of new bone volume and the density of neovascularization in groups B, C, and D were significantly higher than those in group A, and in groups C and D than in group B (P<0.05); but no significant difference was found between groups C and D (P>0.05).ConclusionThe mechanical properties of the new reinforced composite scaffold made from composite chitosan, whisker, and CPC are obviously better than that of pure CPC scaffold material, which can meet the mechanical properties of cortical bone and cancellous bone. iPS-MSCs is attaching and proliferating on the new reinforced composite scaffold material, and the repair effect of bone tissue is good. It can meet the biological and osteogenic activity requirements of the implant materials in the bone defect repair.
Objective To compare the bone resorption between the proximal fixation of the anatomique benoist giraud（ABG） hip and the distal fixation of the anatomic medullary locking（AML） hip by the medium-term X-ray films, and to evaluate the clinical results of the two prostheses. Methods From January 1992 to December 1996, 298 patients (396 hips) underwent the total hip arthroplasty at Wilson Hospital in Korea. In 125 patients, 176 hips were ABG hips, including 103 avascularnecrosis hips, 57 dysplasia hips, and 16 other diseased hips; In the other 173 patient the remaining 220 hips were AML hips, including 147 avascular necrosis hips, 65 dysplasia hips, and 8 other diseased hips. The A-P X-ray imagings were followed up for 5-12 years averaged 8 years, and were compared with the immediate postoperative X-ray imagings. The bone resorption area was measured and the bone resorption cases were recorded according to the Gruen zone obsesvation. Results During operation, 2 ABG hips and 5 AML hips were cracked at the femoral diaphysis; 3 ABG hips and 1 AML hip were cracked at the metaphysis; 6 ABGhips and 3 AML hips were fractured because of trauma after operation; among them, 2 ABG hips needed the stem revision and the remaining hips underwent the openreduction and the internal fixation. During the follow-up, 9 ABG hips were revised, 7 hips of which developed the aseptic loosening. No AML hip was revised, but 3 AML hips developed the aseptic loosening. The bone resorption pattern in theABG and AML hips was similar. The bone resorption occurred most commonly in theGruen zones 1 and 7, and it extended from the metaphysis to the diaphysis. In the Guren zones 2, 5, 6 and 7, there were more AML hips than ABG hips that developed the bone resorption. The bone resorption area around the AML hip was larger than that around the ABG hip. Conclusion The stress shielding bone resorption usually occurs proximally to the union area of the bone and the prosthesis. The ABG prosthesis is a proximal fixation prosthesis, therefore, the stress shielding bone resorption can be reduced. The bone resorption around the AML prosthesis develops slowly within 10 years after operation. The stress shielding bone resoption may reach the summit within 10 years and it will not develop endlessly, so the prosthesis will be stable for a long time. The probabilityof the bone resorption in the ABG prosthesis is smaller than that in the AMLprosthesis. The bone resorption around the AML prosthesis may develop slowly after 10 years and will not affect the stability of the prosthesis for a long time.
ObjectiveTo evaluate the effect of bone cement filling on articular cartilage injury after curettage of giant cell tumor around the knee.
MethodsFifty-three patients with giant cell tumor who accorded with the inclusion criteria were treated between January 2000 and December 2011, and the cl inical data were retrospectively analyzed. There were 30 males and 23 females, aged 16-69 years (mean, 34.2 years). The lesion located at the distal femur in 28 cases and at the proximal tibia in 25 cases. According to Campanacci grade, there were 6 patients at grade I, 38 at grade Ⅱ, and 9 at grade Ⅲ. Of 53 patients, 42 underwent curettage followed by bone cement fill ing, and 11 received curettage followed by bone grafts in the subchondral bony area and bone cement fill ing. Two groups were divided according to whether secondary osteoarthritis occurred or not during postoperative follow-up. The gender, age, lesion site, the subchondral residual bone thickness, tumor cross section, preoperative Campanacci grade, subchondral bone graft, and Enneking function score were compared between 2 groups, and multivariate logistic regression analysis was done.
ResultsAll incisions healed by first intention. The average follow-up time was 65 months (range, 23-158 months). Of 53 cases, 37 (69.8%) had no osteoarthritis, and 16 (30.2%) had secondary osteoarthritis. Three cases (5.7%) recurred during the follow-up period. Univariate logistic regression analysis showed no significant difference in gender, age, lesion site, and Campanacci grade between 2 groups (P>0.1); difference was significant in the subchondral residual bone thickness, tumor cross section, Enneking function score, and subchondral bone graft (P<0.1). The multivariate logistic regression analysis showed that the decreased subchondral residual bone thickness, the increased tumor cross section, and no subchondral bone graft are the risk factors of postoperative secondary osteoarthritis (P<0.05).
ConclusionCurettage of giant cell tumor around the knee followed by bone cement filling can increase the damage of cartilage, and subchondral bone graft can delay or reduce cartilage injury.
Objective To investigate the physicochemicalproperties of the calcium phosphate cement (CPC) containing Danshen composite injection and its drug release rate. Methods This experiment included 4 groups and each group contained 6 specimens. CPC (2 g) was mixed with the setting solution that served as thecontrol group; 0.1,0.5 and 1.0 ml of Danshen composites injection (concentration, 1 000 mg/ml; pH, 7.35) were respectively added to CPC (2 g), which were used as the experimental groups 1, 2 and 3. The resulting specimens were investigated by the X-ray diffraction (XRD), the fourier transformed infrared spectroscopy(FTIR), and the scanning electron microscope (SEM).ResultsThe XRD analysis showed that the control group had a typical diffraction pattern of the hydroxypatite (HAP), which was consistent with the standard patternof HAP. When more Danshen was added in the experimental groups, the diffractionpeaks of HAP gradually decreased; when the diffraction angle 2θ was about 25.92°, the HAP peaks disappeared. Based on the FTIR analysis, with an increase of the drug concentration, the absorption peak of the hydroxy groups decreased. The SEM showed that the size of the CPC particle was related to the drug concentration; with an increase of the drug concentration, the CPC particle increased in number, resulting in an increasing trend of coacervation. The elution test showed that the drugrelease rate and capacity varied with the different concentrationsof Danshen. The initial release rate was relatively great, but after 96 hours the rate slowed down, lasting for a long time. Conclusion The physicochemical properties of CPC do not change when a proper dose (0.1 ml/2 g) of Danshen isadded to CPC. The Danshen composite can be effectively released from CPC, and so CPCcan be used as an ideal drugdelivery carrier for Danshen composite.
