Objective To investigate the effect of surface propertyof different polyether-ester block copolymers［poly(ethylene glycol-terephthalate)/poly(butylene terephthalate), PEGT/PBT］ on the growth of smooth muscle cells (SMCs) and endothelial cells(ECs). Methods Three kinds of copolymers were synthesized, which were 1000-T20 (group A), 1000PEGT70/PBT30 (group B) and 600PEGT70/PBT30 (group C). The water-uptake and contact angle of three polyether-ester membranes were determined. The canine aorta smooth muscle cells and external jugular vein endothelial cells were primarily harvested, subcultured, and then identified. The proliferation of SMCs and ECs on the different polyether-ester membranes were investigated. Results The water-uptake of three copolymers arranged as the sequence of group C＜group A＜group B, and contact angle as the sequence of group C＞group A＞group B, indicating group B being more hydrophilic. However, smooth musclecells andendothelial cells grew poorly on the membrane of group B after low density seeding, but proliferated well on the membranes of group A and group C. Conclusion In contrast with more hydrophilic 1000PEGT70/PBT30, moderately hydrophilic 1000-T20 and 600PEGT70/PBT30 has better compatibility with vascular cells. The above results indicate that the vascular cells can grow well on moderately hydrophilic PEGT/PBT and that PEGT/PBT can be used in vascular tissue engineering.
The poor mechanical property and vulnerability to bacterial infections are the main problems in clinic for dental restoration resins. Based on this problem, the purpose of this study is to synthesize silver-titanium dioxide (Ag-TiO2) nanoparticles with good photocatalytic properties, and add them to the composite resin to improve the mechanical properties and photocatalytic antibacterial capability of the resin. The microstructure and chemical composition of Ag-TiO2 nanoparticles and composite resins were characterized. The results indicated that Ag existed in both metallic and silver oxide state in the Ag-TiO2, and Ag-TiO2 nanoparticles were uniformly dispersed in the resins. The results of mechanical experiments suggested that the mechanical properties of the composite resin were significantly improved due to the incorporation of Ag-TiO2 nanoparticles. The antibacterial results indicated that the Ag-TiO2 nanoparticle-filled composite resins exhibited excellent antibacterial activities under 660 nm light irradiation for 10 min due to the photocatalysis, and the Ag-TiO2 nanoparticle-filled composite resins could also exhibit excellent antibacterial activities after contact with bacteria for 24 h without light irradiation because of the release of Ag ions. In summary, this study provides a new antibacterial idea for the field of dental composite resins.
ObjectiveTo investigate the effects of modification of acellular bovine pericardium with 1-ethyl-3-(3-dinethylami-nopropyl) carbodimide (EDC)/N-hydroxysuccininide (NHS) or genipin and find out the best crosslinking reagent.
MethodsThe cellular components of the bovine pericardiums were removed. The effects of decellularization were tested by HE staining. The acellular bovine pericardiums were crosslinked with EDC/NHS (EDC/NHS group) or genipin (genipin group). The properties of the crosslinked acellular matrix were evaluated by scanning electron microscope (SEM), matrix thickness, crosslinking index, mechanical property, denaturation temperature, enzymatic degradation, and cytotoxicity test before and after the crosslinking. Acellular bovine pericardium (ABP group) or normal bovine pericardium (control group) were harvested as controls.
ResultsSEM showed that collagen fibers were reticulated in bovine pericardial tissues after crosslinked by EDC/NHS or genipin, and relative aperture of the collagen fiber was from 10 to 20 μm. The thickness and denaturation temperature of the scaffolds were increased significantly after crosslinking with EDC/NHS or genipin (P<0.05), while there was no significant difference between EDC/NHS group and genipin group (P>0.05). The difference had no statistical significance in crosslinking index between EDC/NHS group and genipin group (t=0.205, P=0.218). The degradation rate in EDC/NHS group and genipin group was significantly lower than that in ABP group and control group (P<0.05). Elastic modulus and fracture stress in EDC/NHS group and genipin group were significantly lower than those in ABP group (P<0.05), but there was no significant difference among EDC/NHS group, genipin group, and control group (P>0.05). The break elongation in EDC/NHS group and genipin group were significantly increased than those in ABP group and control group (P<0.05). The difference had no statistical significance in stability and mechanical properties between EDC/NHS group and genipin group (P>0.05). Cytotoxicity of genipin crosslinked tissue (grade 1) were much lower than that of EDC/NHS (grade 2) at 5 days.
ConclusionAcellular bovine pericardium crosslinked with genipin has better biocompatibility than EDC/NHS.
Objective To explore the biomechanic effects of multi ple freeze-thaw on human allograft tendons. Methods Thirty tendons (24 flexor digitorum superficial is tendons and 6 flexor poll icis longus tendons) were harvested from 3 fresh cadaver donors and were divided into 6 groups randomly (fresh group; 1 cycle, 2 cycle, 3 cycle, 5 cycle, and 10 cycle freeze-thaw groups). There was 4 flexor digitorum superficial is tendons and 1 flexor poll icis longus tendon in each group. The structural and mechanical properties as well as viscoelastic change were estimated. Results The results of the structural and mechanical properties in 1 cycle, 2 cycle, and 3 cycle freeze-thaw groups were similar to that of the fresh group (P gt;0.05). The tendons in 5 cycle and 10 cycle freeze-thaw groups showed a significantly lower ultimate load and maximum stress when compared with those of fresh group (P lt; 0.05), but there was no significant difference in maximum tensile or maximum strain (P gt; 0.05). Moreover, the tendons in 5 cycle and 10 cycle freeze-thaw groups had a significant increase in viscoelastic properties when compared with fresh group (P lt; 0.05). Conclusion In the cryopreservation of tendon allografts, the cycle of freeze-thaw should not exceed 3 times. Multiple cycle freeze-thaw will weaken the biomechanical properties of tendon allografts, which make grafts easier to fatigue or even rupture.
Znic (Zn) alloys with good cytocompatibility and suitable degradation rate have been a kind of biodegradable metal with great potential for clinical applications. This paper summarizes the biological role of degradable Zn alloy as bone implant materials, discusses the mechanical properties of different Zn alloys and their advantages and disadvantages as bone implant materials, and analyzes the influence of different processing strategies (such as alloying and additive manufacturing) on the mechanical properties of Zn alloys. This paper provides systematic design approaches for biodegradable Zn alloys as bone implant materials in terms of the material selection, product processing, structural topology optimization, and assesses their application prospects with a view to better serve the clinic.
In order to establish a bone scaffold with good biological properties, two kinds of new gradient triply periodic minimal surfaces (TPMS) scaffolds, i.e., two-way linear gradient G scaffolds (L-G) and D, G fusion scaffold (N-G) were designed based on the gyroid (G) and diamond (D)-type TPMS in this study. The structural mechanical parameters of the two kinds of scaffolds were obtained through the compressive simulation. The flow property parameters were also obtained through the computational fluid dynamics (CFD) simulation in this study, and the permeability of the two kinds of scaffolds were calculated by Darcy's law. The tissue differentiation areas of the two kinds of scaffolds were calculated based on the tissue differentiation theory. The results show that L-G scaffold has a better mechanical property than the N-G scaffold. However, N-G scaffold is better than the L-G scaffold in biological properties such as permeability and cartilage differentiation areas. The modeling processes of L-G and N-G scaffolds provide a new insight for the design of bone scaffold. The simulation in this study can also give reference for the prediction of osseointegration after the implantation of scaffold in the human body.
ObjectiveTo study the immunological properties of osteogenically differentiated umbilical cord blood derived mesenchymal stem cells (UCB-MSCs).
MethodsUCB-MSCs were isolated from the umbilical cord vein, and were expanded; the cells at passage 3 were osteogenically induced for 2 weeks in vitro. The expressions of human leukocyte antigen I (HLA-I) and HLA-Ⅱ molecules were observed by flow cytometry analysis before and after osteogenic induction. Peripheral blood T lymphocytes were isolated and cultured with osteoblastic induced or non-osteoblastic induced UCB-MSCs in different cell concentrations of 1×102, 1×103, 1×104, and 1×105 cells/well. The intake value of 3H-thymidine was calculated with luminescence counter. Then T lymphocytes were pretreated with PHA, and co-cultured with osteoblastic induced and non-osteoblastic induced UCB-MSCs as described above. IL-2 was further added to test the reversed effect of T lymphocytes proliferation stimulated by UCB-MSCs. Finally, to investigate whether the immunomodulatory effects on T lymphocytes proliferation depend on direct or indirect cell contact, the Transwell chamber culture system of UCB-MSCs and T lymphocytes was established.
ResultsFlow cytometry analysis showed that non-osteoblastic induced UCB-MSCs expressed HLA-I but did not express HLA-Ⅱ; the expression of HLA-Ⅱ increased in osteoblastic induced UCB-MSCs. No T lymphocyte response was stimulated by non-osteoblastic induced UCB-MSCs, but osteoblastic induced UCB-MSCs could stimulate the proliferation of allogeneic T lymphocytes, especially after IFN-γ treatment. Non-osteoblastic induced UCB-MSCs of 1×104 and 1×105 cells/well could suppress the proliferation of T lymphocytes evoked by PHA, and this suppression could be reversed by the addition of IL-2. While osteoblastic induced UCB-MSCs did not have such suppressive effect. The results of the Transwell culture system also showed that non-osteoblastic induced UCB-MSCs could obviously inhibit the proliferation of T lymphocytes, but the osteoblastic induced UCB-MSCs could not.
ConclusionThe immunological properties of UCB-MSCs will change accordingly after osteogenic induction, so UCB-MSCs might not be suitable for the seed cells of bone tissue engineering.
In vitro experimental test for mechanical properties of a vascular stent is a main method to evaluate its effectiveness and safety, which is of great significance to the clinical applications. In this study, a comparative study of planar, V-groove and radial compression methods for the radial support property test were performed, and the effects of compression rate and circumferential position on the test results were conducted. Based on the three-point bending method, the influences of compression rate and circumferential position on flexibility were also explored. And then a best test proposal was selected to evaluate the radial support property and flexibility of the three self-designed stents and the comparative biodegradable vascular stent (BVS) (BVS1.1, Abbott Vascular, USA) with different outside diameters of 1.4 mm, 1.7 mm and 2.4 mm. The results show that the developing trends of the compression load with the compression displacement measured by the three radial support property test methods are the same, but normalized radial force values are quite different. The planar compression method is more suitable for comparing the radial support properties of stents with different diameters and structures. Compression rate has no obvious effect on the testing results of both the radial support property and flexibility. Compression circumferential position has a great impact on testing radial support property with the planar or V-groove compression methods and testing flexibility with three-point bending method. The radial support properties of all the three self-designed stents are improved at a certain degree compared to that of the BVS stent. The study has better guide significance and reference value for testing mechanical properties of vascular stents.
Objective To prepare silver-containing hydroxyapatite coating (hydroxyapatite/Ag, HA/Ag) and investigate its antibacterial property and biocompatibil ity in vitro. Methods Vacuum plasma spraying technique was adopted to prepare HA/Ag coating on titanium alloy substrate (3% Ag). After incubating the HA/Ag and the HA coating under staphylococcus aureus and pseudomonas aeruginosa suspensions of 2% tryptic soy broth (TBS) medium for 2, 4 and 7 days, respectively, the biofilm on the coatings was examined by confocal laser scanning microscope, and the bacterial density and viable bacterial percentage of bacterial biofilm were calculated. Meanwhile, the micro-morphology of bacterial biofilm was observed by SEM, the cytotoxicity was detected via MTT and the biocompatibil ity of biofilm was evaluated by acute aemolysis test. Results Compared with HA coating, the bacterial biofilm’s thickness on the surface of HA/Ag coating witnessed no significant difference at 2 days after culture (Pgt; 0.05), but decreased obviously at 4 and 7 days after culture (P lt; 0.01). The bacterial density of the biofilm increased with time, but there was no significant difference between two coatings (P gt; 0.05) at 2, 4 and 7 days after culture. The viable bacterial percentage of the biofilms on the surface of HA/Ag coating decreased obviously compared with that of HA coating at 2, 4 and 7 days after cultureP lt; 0.01). The MTT notified the cytotoxic grade of both coatings was zero. The acute haemolysis assay showed that the hemolytic rate of HA/Ag and HA coating was 0.19% and 0.12%, respectively. Conclusion With good biocompatibil ity, significant antibacterial property against staphylococcus aureus and pseudomonas aeruginosa, no obvious cytotoxicity and no erythrocyte destruction, the vacuum plasma sprayed HA/Ag coating is a promising candidate for the surface of orthopedic metal implants to improve their osseointegration and antibacterial property.
ObjectiveTo manufacture a polycaprolactone (PCL)/type Ⅰ collagen (COL Ⅰ) tissue engineered meniscus scaffold (hereinafter referred to as PCL/COL Ⅰ meniscus scaffold) by three-dimensional (3D) printing with low temperature deposition technique and to study its physicochemical properties.MethodsFirst, the 15% PCL/4% COLⅠ composite solution and 15% PCL simple solution were prepared. Then, 15% PCL/4% COL Ⅰmeniscus scaffold and 15% PCL meniscal scaffold were prepared by using 3D printing with low temperature deposition techniques. The morphology and microstructure of the scaffolds were observed by gross observation and scanning electron microscope. The compression modulus and tensile modulus of the scaffolds were measured by biomechanical test. The components of the scaffolds were analyzed by Fourier transform infrared spectroscopy (FTIR). The contact angle of the scaffold surface was measured. The meniscus cells of rabbits were cultured with the two scaffold extracts and scaffolds, respectively. After cultured, the cell proliferations were detected by cell counting kit 8 (CCK-8), and the normal cultured cells were used as controls. Cell adhesion and growth of scaffold-cell complex were observed by scanning electron microscope.ResultsAccording to the gross and scanning electron microscope observations, two scaffolds had orientated 3D microstructures and pores, but the surface of the PCL/COLⅠ meniscus scaffold was rougher than the PCL meniscus scaffold. Biomechanical analysis showed that the tensile modulus and compression modulus of the PCL/COL Ⅰ meniscus scaffold were not significantly different from those of the PCL meniscus scaffold (P>0.05). FTIR analysis results showed that COL Ⅰ and PCL were successful mixed in PCL/ COL Ⅰ meniscus scaffolds. The contact angle of PCL/COLⅠ meniscus scaffold [(83.19±7.49)°] was significantly lower than that of PCL meniscus scaffold [(111.13±5.70)°] (t=6.638, P=0.000). The results of the CCK-8 assay indicated that with time, the number of cells cultured in two scaffold extracts showed an increasing trend, and there was no significant difference when compared with the control group (P>0.05). Scanning electron microscope observation showed that the cells attached on the PCL/ COL Ⅰ meniscus scaffold more than that on the PCL scaffold.ConclusionPCL/COLⅠmeniscus scaffolds are prepared by 3D printing with low temperature deposition technique, which has excellent physicochemical properties without cytotoxicity. PCL/COLⅠmeniscus scaffold is expected to be used as the material for meniscus tissue engineering.
