ObjectiveTo establish pig abdomen bullet wound model in seawater immersion condition and to analyze injury characteristics.
MethodsTwenty Xishuangbanna pigs were randomly divided into seawater immersion group and control group,with 10 in each group.The left lower quadrant anti McBurney point of the pig semi-floating in the seawater was shot by using domestic 81-1 assault rifle at the distance of 10 meters,which were salvaged out of seawater at 60 minutes after injury in the seawater immersion group.The pigs in the control group were treated same as the seawater immersion group except seawater immersion.The mean arterial pressure (MAP),rectal temperature (RT),heart rate (HR),respiratory (R),white blood cell count (WBC),and C-reactive protein (CRP) were tested at 1 h,4 h,8 h after injury.The death of pig was observed.
ResultsThe pig abdomen bullet wound models in the seawater immersion condition were successfully established.① Compared with the control group,the MAP and RT were significantly decreased at 1 h,4 h,8 h after injury,the HR or the R was significantly decreased at 4 h or 8 h after injury respectively in the seawater immersion group.② Compared with the normal value,the WBC obviously rose at 4 h and 8 h after injury,the CRP obviously rose at 1 h,4 h,and 8 h after injury in both two groups.Compared with the control group,the WBCs were significantly increased at 4 h and 8 h after injury (P<0.05),the CRPs were significantly increased at 1 h,4 h,and 8 h after injury (P<0.05) in the seawater immersion group.③ The mortality in the seawater immersion group (50%) was significantly higher than that in the control group (20%,P<0.05).
ConclusionThe injury is more serious,the infection time is earlier,and the infection degree is aggravated,the mortality rate is higher for pig abdomen bullet wound model in seawater immersion condition.
Objective To investigate the methods of establishing 3-dimensional skull model using electron beam CT(EBCT) data rapid prototyping technique, andto discuss its application in repairing crainomaxillofacial trauma. Methods The data were obtained by EBCTcontinuous volumetric scanning with 1.0 mm slice at thickness. The data were transferred to workstation for 3-dimensional surface reconstruction by computeraided design software and the images were saved as STL file. The data can be usedto control a laser rapid-prototyping device(AFS-320QZ) to construct geometricmodel. The material for the model construction is a kind of laser-sensitive resinpower, which will become a mass when scanned by laser beam .The design and simulation of operation can be done on the model. The image data were transferred to the device slice by slice. Thus a geometric model is constructed according to the image data by repeating this process. Preoperative analysis, surgery simulation and implant of bone defect could be done on this computer-aided manufacture d3D model. One case of craniomaxillofacial bone defect resulting from trauma wasreconstructed with this method. The EBCT scanning showed that the defect area was 4 cm×6 cm. The nose was flat and deviated to left. Results The -3dimensional -skull was reconstructed with EBCT data and rapid prototyping technique. The model can display the structure of 3-dimenstional anatomyand their relationship.The prefabricated implant by 3-dimensional model was well-matched with defect .The deformities of flat and deviated nose were corrected. The clinical result wassatisfactory after a follow-up of 17 months. Conclusion The 3-dimensional model of skull can replicate the prototype of disease and play an important role in the diagnosis and simulation of operation for repairing craniomaxillofacial trauma.
Interrupted time series (ITS) analysis is a quasi-experimental design for evaluating the effectiveness of health interventions. By controlling the time trend before the intervention, ITS is often used to estimate the level change and slope change after the intervention. However, the traditional ITS modeling strategy might indicate aggregation bias when the data was collected from different clusters. This study introduced two advanced ITS methods of handling hierarchical data to provide the methodology framework for population-level health intervention evaluation.
Objectives Based on the Global Minimum Essential Requirement in Medical Education (GMER), we tried to use the theories and methods of “competency” as a reference to introduce the concept of “competency” into medical education in China and to investigate the skills that medical graduates need for their prospective clinical work. Methods According to a literature search and expert interviews, the Glossary of Medical Graduates’ Competencies was built to define the competencies needed by medical graduates. Students’ attitudes toward those competencies were surveyed by questionnaires. Factor analysis and Analytic Hierarchy Process (AHP) were used to analyze the data and to build the Medical Graduates’ Competency Model. Results The competencies of medical graduates could be divided into six groups. The weighting of each competency group and specific competence was different. Conclusion The Medical Graduate Competency Model can be used to evaluate medical graduates’ capacities. It has significant reference value for medical education, in terms of the evaluation of medical graduates and the reform of teaching methods.
Objective To establish the model of pancreatoduodenal allotransplantation in pigs with enteric drainage (ED) and portal venous drainage (PVD). Methods Forty-six hybrid landraces were divided into two groups (donor and recipient groups) randomly, for pancreatoduodenal allotransplantation. Donors were perfused via abdomial aorta without clamping the portal venous outflow with UW solution after heparinization. Whole pancreatoduodenal graft was arvested with segments of abdomial aorta and portal vein and shaped under cold UW solution. Then, the end-to-end nastomosis was performed with the donor iliac artery bifurcation “Y” graft to the recipient superior mesenteric arteries and celiac artery. Furthermore, type Ⅰdiabete model was made by removal of the recipient pancreas. The venous anastomosis was reconstructed between the donor portal vein and the recipient superior mesenteric vein. Meanwhile, the end-to-side anastomosis was performed with the donor common iliac artery bifurcation “Y” graft to the recipient abdomial aorta and the side-to-side intestinal anastomosis was performed between the donor duodenum and the recipient jejunum. External jugular vein was intubated for transfusion. The levels of blood glucose， insulin and glucagon in blood were measured before and during the operation and 1， 3， 5， 7 d after operation. Results Twenty-three cases of pancreatoduodenal allotranplantations were performed on pigs. One died from complication of anesthesia. Success rate of operation was 95.7％.Complications of operation happened in 2 cases in which one was phlebothrombosis, incidence 4.5％and the other was duodenojejunal anastomotic leak, incidence 4.5％. The level of blood glucose increased within 30 min and recovered on the 2nd day after removal of pancreas. The levels of insulin and glucagon decreased within 30 min and recovered on the 2nd day after removal of pancreas. Rejection curred at the 1st day and reached the worst level on the 9th day after transplantation without the change of insulin and glucagon in blood and clinical symptoms of rejection. Conclusion Pancreatoduodenal transplantation in pigs can treat type Ⅰ diabete. ED and PVD can keep the function of endocrine in normal. The technique of duodenal transplantation with ED and PVD may pave the way for the further development of pancreas transplantation in clinic.
ObjectiveTo observe the pathological changes in heart and lung tissues in rats with pulmonary hypertension induced by monocrotaline.
MethodsTwenty-four male Sprague-Dawley rats were randomly and equally divided into an experimental group and a control group. The rats in the experimental group were intraperitoneally injected with monocrotaline to induce pulmonary hypertension, and the rats in the control group were treated with saline. All rats were fed for 3 weeks, and the general situation were observed. Then the rats were sacrificed for measurement of mean pulmonary artery pressure (mPAP), right ventricular hypertrophy index [RV/(LV+S)], changes of myocardial cells and lung vascular, calculated density of middle membrane smooth muscle cells (SMC) in medium/small pulmonary arteries accompanied with bronchi and alveoli, media thickness of pulmonary artery (PAMT), the percentage of wall thickness with outer diameter (WT%), the percentage of wall area with total area (WA%), the average diameter of myocardial cells (AD), and myocardial nuclei density (MND).
ResultsCompared with the control group, the condition of rats in the experimental group were getting worse obviously.mPAP and RV/(LV+S) were both increased (both P < 0.05). The observation by light microscope revealed that obvious myocardial hypertrophy and structure disturbances, severe luminal stenosis of medium/small pulmonary arteries, medial thickening, infiltration of inflammatory cell in tissue space, proliferation of unorganized collagen fibers in the experimental group. The observation by electronic microscope showed proliferation of endothelial cell with irregular nuclei, increased organelles and vacuoles in the experimental group. The differences in SMC, PAMT, WT%, WA%, AD, and MND were significant between two groups (all P < 0.05).
ConclusionsThe monocrotaline can induced pulmonary hypertension and right ventricular hypertrophy. The mechanism may be related to severe stenosis or occlusion of the vessel lumen caused by plexiform proliferation of endothelial cells, proliferation of smooth muscle cells and collagen fibers, compensatory hypertrophy and hyperplasia of myocardial cells.
ObjectiveProlonged mechanical ventilation (PMV) is a prognostic marker for short-term adverse outcomes in patients after lung transplantation.The risk of prolonged mechanical ventilation after lung transplantation is still not clear. The study to identify the risk factors of prolonged mechanical ventilation (PMV) after lung transplantation.Methods This retrospective observational study recruited patients who underwent lung transplantation in Wuxi People’s Hospital from January 2020 to December 2022. Relevant information was collected from patients and donors, including recipient data (gender, age, BMI, blood type, comorbidities), donor data (age, BMI, time of endotracheal intubation, oxygenation index, history of smoking, and any comorbidity with multidrug-resistant bacterial infections), and surgical data (surgical mode, incision type, operation time, cold ischemia time of the donor lung, intraoperative bleeding, and ECMO support), and postoperative data (multi-resistant bacterial lung infection, multi-resistant bacterial bloodstream infection, and mean arterial pressure on postoperative admission to the monitoring unit). Patients with a duration of mechanical ventilation ≤72 hours were allocated to the non-prolonged mechanical ventilation group, and patients with a duration of mechanical ventilation>72 hours were allocated to the prolonged mechanical ventilation group. LASSO regression analysis was applied to screen risk factors., and a clinical prediction model for the risk of prolonged mechanical ventilation after lung.ResultsPatients who met the inclusion criteria were divided into the training set and the validation set. There were 307 cases in the training set group and 138 cases in the validation set group. The basic characteristics of the training set and the validation set were compared. There were statistically significant differences in the recipient’s BMI, donor’s gender, CRKP of the donor lung swab, whether the recipient had pulmonary infection before the operation, the type of transplantation, the cold ischemia time of the donor lung, whether ECMO was used during the operation, the duration of ECMO assistance, CRKP of sputum, and the CRE index of the recipient's anal test (P<0.05). 2. The results of the multivariate logistic regression model showed that female recipients, preoperative mechanical ventilation in recipients, preoperative pulmonary infection in recipients, intraoperative application of ECMO, and the detection of multi-drug resistant Acinetobacter baumannii, multi-drug resistant Klebsiella pneumoniae and maltoclomonas aeruginosa in postoperative sputum were independent risk factors for prolonged mechanical ventilation after lung transplantation. The AUC of the clinical prediction model in the training set and the validation set was 0.838 and 0.828 respectively, suggesting that the prediction model has good discrimination. In the decision curves of the training set and the validation set, the threshold probabilities of the curves in the range of 0.05-0.98 and 0.02-0.85 were higher than the two extreme lines, indicating that the model has certain clinical validity.ConclusionsFemale patients, Preoperative pulmonary infection, preoperative mechanical ventilation,blood type B, blood type O, application of ECMO assistance, multi-resistant Acinetobacter baumannii infection, multi-resistant Klebsiella pneumoniae infection, and multi-resistant Stenotrophomonas maltophilia infection are independent risk factors for PMV (prolonged mechanical ventilation) after lung transplantation.
